Abstract:We demonstrate 40 Gb/s all-optical clock recovery by using a monolithic integrated amplified-feedback laser (AFL) with coherent injection-locked method. The AFL consists of a gain-coupled DFB laser and an optical amplified feedback external cavity. With proper design and operation of AFL, the device can work at self-pulsation state that resulted from the beating between two lasing modes. The self-pulsation can be injection-locked to the optical clock embedded in input data streams. Due to different work mechanisms, there are two all-optical clock recovery operation modes: incoherent injection-locked and coherent injection-locked. It's predicted that the coherent injection method has various advantages: 1) requiring low injection power recovery, 2) independent of the bit rate and 3) introducing little timing jitter to the recovered clock. The robustness of coherent clock recovery is confirmed by our experimental results. We set up a return-to-zero (RZ) pseudorandom binary sequence (PRBS) data streams all-optical clock recovery system. This coherent injection-locked based clock recovery method is optical signal noise ratio (OSNR) and chromatic dispersion (CD) degeneration tolerant, and has low timing jitter and high sensitivity.

Comb-like Filter Preprocessing to Reduce the Pattern Effect in the Clock Recovery Based on SOA

Combination of Comb-Like Filter and SOA for Preprocessing to Reduce the Patten Effect in the Clock Recovery

Novel approach to reduce the pattern effect in 10-Gb/s clock recovery

A Simple Method for Clock Recovery

A Novel Technology to Reduce the Pattern Effect in All-Optical Clock Recovery Using Injected Mode-Locked Laser Based on Soa

All-optical frequency multiplication/recovery based on the semiconductor optical amplifier ring cavity

A novel approach for clock recovery without pattern effect from degraded signal

Low timing jitter 40 Gb/s all-optical clock recovery based on an amplified feedback laser diode

All-Optical Clock Recovery from Non-Return to Zero Data Stream Based on Semiconductor Optical Amplifier and Stimulated Brillouin Scattering

100-GHz wavelength-tunable all-optical clock recovery with Fabry-Perot filter and semiconductor optical amplifier

Optimizing Clock Enhancement to Achieve Modulation-Format-Independent All-Optical Clock Recovery

40 Gb/s Clock Recovery Based on Optical Phase-Locked Loop

Short Pulsewidth Clock Recovery at 100 GHz Using Fabry-Perot Cavity and Semiconductor Optical Amplifiers

Using Signal Pre-Distortion to Enhance the Performance of All-Optical Clock Recovery

Tailoring the Time Delay of Optical Pulse/sequence Employing Cascaded SOA and Band-Pass Filter

Simultaneous Prescaled and Frequency-Doubled Clock Recovery Using an Injection-Locked Optoelectronic Oscillator

All-Optical Clock Recovery for 20 Gb/s Using an Amplified Feedback DFB Laser

Effective Optical Clock Recovery and Simultaneous Fourfold Demultiplexing of Otdm Signal Using an Optoelectonic Oscillator

100-Ghz All-Optical Clock Recovery with Fabry-Perot Cavity and Semiconductor Optical Amplifier

Time-lens Based Optoelectronic Oscillator for Simultaneous Clock Recovery and Demultiplexing of OTDM Signal

All-optical Subharmonic Clock Recovery Using an Injected Mode-locked Fiber Ring Laser