Abstract:We demonstrate 40 Gb/s all-optical clock recovery by using a monolithic integrated amplified-feedback laser (AFL) with coherent injection-locked method. The AFL consists of a gain-coupled DFB laser and an optical amplified feedback external cavity. With proper design and operation of AFL, the device can work at self-pulsation state that resulted from the beating between two lasing modes. The self-pulsation can be injection-locked to the optical clock embedded in input data streams. Due to different work mechanisms, there are two all-optical clock recovery operation modes: incoherent injection-locked and coherent injection-locked. It's predicted that the coherent injection method has various advantages: 1) requiring low injection power recovery, 2) independent of the bit rate and 3) introducing little timing jitter to the recovered clock. The robustness of coherent clock recovery is confirmed by our experimental results. We set up a return-to-zero (RZ) pseudorandom binary sequence (PRBS) data streams all-optical clock recovery system. This coherent injection-locked based clock recovery method is optical signal noise ratio (OSNR) and chromatic dispersion (CD) degeneration tolerant, and has low timing jitter and high sensitivity.

Novel approach to reduce the pattern effect in 10-Gb/s clock recovery

Comb-like Filter Preprocessing to Reduce the Pattern Effect in the Clock Recovery Based on SOA

A novel approach for clock recovery without pattern effect from degraded signal

A Simple Method for Clock Recovery

Combination of Comb-Like Filter and SOA for Preprocessing to Reduce the Patten Effect in the Clock Recovery

A Novel Technology to Reduce the Pattern Effect in All-Optical Clock Recovery Using Injected Mode-Locked Laser Based on Soa

Low timing jitter 40 Gb/s all-optical clock recovery based on an amplified feedback laser diode

100-GHz wavelength-tunable all-optical clock recovery with Fabry-Perot filter and semiconductor optical amplifier

All-Optical Clock Recovery from Non-Return to Zero Data Stream Based on Semiconductor Optical Amplifier and Stimulated Brillouin Scattering

100-Ghz All-Optical Clock Recovery with Fabry-Perot Cavity and Semiconductor Optical Amplifier

All-optical frequency multiplication/recovery based on the semiconductor optical amplifier ring cavity

All-Optical Clock Recovery for 20 Gb/s Using an Amplified Feedback DFB Laser

40 Gb/s Clock Recovery Based on Optical Phase-Locked Loop

Short Pulsewidth Clock Recovery at 100 GHz Using Fabry-Perot Cavity and Semiconductor Optical Amplifiers

Optimizing Clock Enhancement to Achieve Modulation-Format-Independent All-Optical Clock Recovery

Clock Recovery for OTDM and 3R Regeneration

All Optical Clock Recovery from Degraded Non-Return-to-Zero Data Stream

A Novel All-Optical Clock Recovery Experiment for Extracting Clock Signal from OTDM Signal

40Gbits/s All-Optical Clock Recovery for Degraded Signals Using an Amplified Feedback Laser

Amplified feedback DFB laser for 40 Gb/s all-optical clock recovery

Clock recovery from degraded signals at high repetition rates using a two-ring injection mode-locked fiber ring laser