Abstract:Hydrogenation of CO 2 to dimethyl ether (DME) is an effective measure to deal with global climate change and solve the shortage of energy supply and demand. A series of CuZn/HZ bifunctional catalysts were prepared using CuZn bimetallic coordination polymer as the precursor by in-situ introduction method and physical blend. The in situ introduction method increases the interaction between Cu, ZnO, and HZSM-5, thereby providing a close contact environment between the metal and the acidic site. It is demonstrated that the synergistic effect of metal active sites and acid dehydration sites can increase the production of methanol and DME during CO 2 conversion. CuZn/HZ-IS-AC catalyst prepared by in situ introduction of ammonia-citric acid-modified HZSM-5 has more Cu-ZnO interfaces and basic sites, thus improving the adsorption and activation of CO 2 . Moreover, CuZn/HZ-IS-AC catalyst with hierarchical structure is more conducive to product diffusion and DME selectivity. Compared with the catalyst prepared by the physical method, the CuZn/HZ-IS-AC catalyst prepared by in situ introduction method has excellent catalytic properties with the CO 2 conversion rate of 31.2 % and the DME selectivity of 50.6 % at 260 °C and 3.0 MPa. In situ DRIFTS analysis showed that abundant formate intermediates and high CO 2 adsorption capacity were favorable for CO 2 hydrogenation. Therefore, the catalyst constructed on the microstructure can realize the efficient coupling of metal actives and the acidic site, the acid-base regulation and effectively improved the catalytic properties of CO 2 hydrogenation.

Effect of the Hydrogenation Components on Copper-Based Catalysts for Synthesis of Dimethyl Ether from CO2 Hydrogenation

Selective Hydrogenation of Dimethyl Maleate to Tetrahydrofuran over Cu/SiO2 Catalyst: Effect of Cu+ on the Catalytic Performance

Synergistic Effect of Zinc and Manganese in Cu-Mn-Zn/Y Catalyst for Syngas-to-dimethyl Ether

Advances in copper-based catalyst for the methanol synthesis from CO2 hydrogenation

Effect of the Addition of Manganese and Zinc on the Properties of Copper-Based Catalyst for the Synthesis of Syngas to Dimethyl Ether

Effect of copper content on Cu–Mn–Zn/zeolite-Y catalysts for the synthesis of dimethyl ether from syngas

Effect of the Content of Metallic Component on Cu-Mn-Zn/Y Catalysts for Direct Synthesis of DME

HYDROGENATION ON SUPPORTED Cu-Mn-ZnOX CATALYST--EFFECT OF PREPARATION METHOD AND REACTION CONDITIONS

Optimizing CO 2 Hydrogenation to DME through Tailored Interfacial Interactions: Weakening Synergy in CuZnZr and Al-Modified SBA-15 Catalysts

Dimethyl Ether Synthesis from CO2 Hydrogenation on a CuO−ZnO−Al2O3−ZrO2/HZSM-5 Bifunctional Catalyst

Characterization of Cu-Mn/Zeolite-Y Catalyst for One-Step Synthesis of Dimethyl Ether from Co-H-2

Effect of Cu and Zn on the performance of Cu-Mn-Zn/ZrO2 catalysts for CO2 hydrogenation to methanol

Mechanism and catalytic performance for direct dimethyl ether synthesis by CO2 hydrogenation over CuZnZr/ferrierite hybrid catalyst

A NOVEL PREPARETION OF Cu-Mn CATALYSTS FOR DIMETHYL ETHER SYNTHESIS FROM SYNGAS

A novel bifunctional catalyst obtained by in situ introduction of hierarchically structured HZSM-5 for direct DME synthesis from CO 2 hydrogenation

DME synthesis from carbon dioxide and hydrogen over Cu–Mo/HZSM-5

Dimethyl Ether Synthesis from Co2 Hydrogenation over Cuo-Tio2-Zro2/Hzsm-5 Catalysts

Role of the Cu dopant in the textural and catalytic features of the Co/ZnO catalyst for dimethyl oxalate selective hydrogenation

Direct Synthesis of Dimethyl Ether on Supported Cu-Mn Catalysts

Selective Hydrogenation of CO2 into Dimethyl Ether over Hydrophobic and Gallium-Modified Copper Catalysts