A novel bifunctional catalyst obtained by in situ introduction of hierarchically structured HZSM-5 for direct DME synthesis from CO 2 hydrogenation

Xinpeng Guo,Jian Yin,Sijia Xia,Jiating Gong,Jiazhen He,Feiying Tang,Cuncun Zuo,Pingle Liu
DOI: https://doi.org/10.1016/j.fuel.2024.131057
IF: 7.4
2024-02-02
Fuel
Abstract:Hydrogenation of CO 2 to dimethyl ether (DME) is an effective measure to deal with global climate change and solve the shortage of energy supply and demand. A series of CuZn/HZ bifunctional catalysts were prepared using CuZn bimetallic coordination polymer as the precursor by in-situ introduction method and physical blend. The in situ introduction method increases the interaction between Cu, ZnO, and HZSM-5, thereby providing a close contact environment between the metal and the acidic site. It is demonstrated that the synergistic effect of metal active sites and acid dehydration sites can increase the production of methanol and DME during CO 2 conversion. CuZn/HZ-IS-AC catalyst prepared by in situ introduction of ammonia-citric acid-modified HZSM-5 has more Cu-ZnO interfaces and basic sites, thus improving the adsorption and activation of CO 2 . Moreover, CuZn/HZ-IS-AC catalyst with hierarchical structure is more conducive to product diffusion and DME selectivity. Compared with the catalyst prepared by the physical method, the CuZn/HZ-IS-AC catalyst prepared by in situ introduction method has excellent catalytic properties with the CO 2 conversion rate of 31.2 % and the DME selectivity of 50.6 % at 260 °C and 3.0 MPa. In situ DRIFTS analysis showed that abundant formate intermediates and high CO 2 adsorption capacity were favorable for CO 2 hydrogenation. Therefore, the catalyst constructed on the microstructure can realize the efficient coupling of metal actives and the acidic site, the acid-base regulation and effectively improved the catalytic properties of CO 2 hydrogenation.
energy & fuels,engineering, chemical
What problem does this paper attempt to address?