Abstract:A type of bi-functional hybrid catalyst of Pd-decorated CNT-promoted Cu-ZrO2 admixed with HZSM-5 zeolite was developed, and displayed excellent performance for the direct synthesis of dimethyl ether (DME) from CO2/H2 via CH3OH in a single fixed-bed continuous flow reactor. Over a CuZr–PdCNTs/HZSM-5 hybrid catalyst under reaction conditions of 5.0MPa, 523K, V(H2)/V(CO2)/V(N2)=69/23/8, GHSV=25,000mLSTP/(h g-hydr. catal.), the observed specific rate of CO2 hydrogenation-conversion reached 0.39μmol/(s m2-Cu0-SA), which was 1.22 times that of the corresponding Pd/CNTs-free counterpart CuZr/HZSM-5. The addition of a minor amount of the Pd-decorated CNTs into the CuZr/HZSM-5 host catalyst caused little change in the apparent activation energy for CO2 hydrogenation, but led to an increase of metal Cu exposed area (catalytically active Cu surface-sites closely associated with the CO2 hydrogenation to methanol) and marked improvement of adsorption performance of the catalyst for H2 and CO2. The latter would help generate a micro-environment with higher concentration of active H and CO2 adspecies at the surface of the functioning catalyst, thus increasing the rate of the surface hydrogenation reactions. The present study also demonstrated that combining the methanol-synthesis and methanol-dehydration-to-DME processes in heterogeneous “one-pot” reactions by using the bi-functional hybrid catalyst could indeed enhance the driving force for CO2 hydrogenation conversion.

Dimethyl Ether Synthesis from CO2 Hydrogenation on a CuO−ZnO−Al2O3−ZrO2/HZSM-5 Bifunctional Catalyst

Dimethyl Ether Synthesis from Co2 Hydrogenation over Cuo-Tio2-Zro2/Hzsm-5 Catalysts

Mechanism and catalytic performance for direct dimethyl ether synthesis by CO2 hydrogenation over CuZnZr/ferrierite hybrid catalyst

Study on Catalytic activity of Cu-Mn/HZSM-5 Catalyst for Dimethyl Ether Synthesis

Optimizing CO 2 Hydrogenation to DME through Tailored Interfacial Interactions: Weakening Synergy in CuZnZr and Al-Modified SBA-15 Catalysts

Pd/CNT-promoted CuZrO2/HZSM-5 hybrid catalysts for direct synthesis of DME from CO2/H2

Study on Catalyst C207-HZSM-5 for Dimethyl Ether Synthesis

Direct Synthesis of Dimethyl Ether on Supported Cu-Mn Catalysts

Synthesis of Dimethyl Ether (DME) on Modified HY Zeolite and Modified HY Zeolite-Supported Cu–Mn–Zn Catalysts

Catalysis for One-step Synthesis of Dimethyl Ether from Hydrogenation of CO

Single-Step Synthesis of Dimethyl Ether from Biomass-Derived Syngas over Cuo-Zno-Mox (M = Zr, Al, Cr, Ti)/Hzsm-5 Hybrid Catalyst: Effects of Mox

Low-temperature synthesis of DME from CO2/H2 over Pd-modified CuO–ZnO–Al2O3–ZrO2/HZSM-5 catalysts

Preparation of Cu/ZnO/Al2O3 Catalysts in a Solvent-Free Routine for CO Hydrogenation

Catalytic activity for direct CO2 hydrogenation to dimethyl ether with different proximity of bifunctional Cu-ZnO-Al2O3 and ferrierite

Methanol Synthesis from CO2 Hydrogenation with a Cu/Zn/Al/Zr Fibrous Catalyst

A Highly Efficient Hybrid Catalyst for ″One-Pot″ Two-step Catalytic Synthesis of Dimethyl Ether from (CO2+H2) Via CH3OH

Synthesis of Cu-Zno-Pt@Hzsm-5 Catalytic Membrane Reactor for Co2 Hydrogenation to Dimethyl Ether

Effect of the Hydrogenation Components on Copper-Based Catalysts for Synthesis of Dimethyl Ether from CO2 Hydrogenation

Preparation, Structure And Performance Of [Cuo-Zno-Al2o3]/[Hzsm-5] Core-Shell Bifunctional Catalysts For One-Step Synthesis Of Dimethyl Ether From Co2+H-2

CO2 hydrogenation to methanol and dimethyl ether at atmospheric pressure using Cu-Ho-Ga/γ–Al2O3 and Cu-Ho-Ga/ZSM-5: Experimental study and thermodynamic analysis

Dimethyl Ether Synthesis from Methanol and Syngas over Different Sized HY Zeolite and Cu-Mn-Zn/HY Bifunctional Catalyst