Abstract:In terms of the mechanisms of methanol synthesis from synthesis gas and methanol dehydration, it was predicted that the yield of dimethyl ether (DME) would be greatly increased if the inter-dispersion of the oxide particles in the catalyst was enhanced. For comparison, 4 methods-- bi-hydrolysis precipitation and three other methods were used to prepare the catalysts: (1) Low-dispersion mixing: A commercial Cu/Zn/Al methanol catalyst having a size range of 20--40 mesh was mechanically mixed with a dehydration catalyst {gamma}-alumina with the same size range; (2) High-dispersion mixing: The two catalysts used in 1 were ground together to {minus}200 mesh and pelletized and then crushed to 20--40 mesh; (3) Co-precipitation impregnation as reported in a cited reference; (4) Bi-hydrolysis precipitation: An aqueous solution of mixed nitrates of copper and zinc and an aqueous solution of NaAlO{sub 2} were simultaneously dropped into a beaker containing some deionized water. A precipitate was formed which was filtered, washed, dried and calcined. The particle size of the catalysts prepared by methods 3 and 4 charged into the reactor were in the same range as those by methods 1 and 2. Catalysts prepared by methods 1, 2, 3 and 4 are designated as Cat-1, Cat-2, Cat-3more » and Cat-4 respectively. The inter-dispersion of the oxides particles were in the order of Cat-1 < Cat-2 < Cat-3 < Cat-4. The catalysts were evaluated for activity in a tubular flow reactor with a feed having a mole composition of H{sub 2}/CO/CO{sub 2} = 64/31/5 under 270 C, 3 MPa and a space velocity of 2000 h{sup {minus}1}. Results are presented in a table and briefly discussed.« less

Study on Catalyst C207-HZSM-5 for Dimethyl Ether Synthesis

Study on Catalytic activity of Cu-Mn/HZSM-5 Catalyst for Dimethyl Ether Synthesis

Dimethyl Ether Synthesis from CO2 Hydrogenation on a CuO−ZnO−Al2O3−ZrO2/HZSM-5 Bifunctional Catalyst

Dimethyl Ether Synthesis from Co2 Hydrogenation over Cuo-Tio2-Zro2/Hzsm-5 Catalysts

Mechanism and catalytic performance for direct dimethyl ether synthesis by CO2 hydrogenation over CuZnZr/ferrierite hybrid catalyst

Highly Efficient Synthesis of Dimethyl Ether from Syngas over the Admixed Catalyst of CuO–ZnO–Al2O3 and Antimony Oxide Modified HZSM-5 Zeolite

THE DIRECT SYNTHESIS OF DIMETHYL ETHER FROM SYNGAS OVER THE HYBRID CATALYST WITH ANTIMONY MODIFIED HZSM-5 ZEOLITE AS ACID COMPONENT

Single-Step Synthesis of Dimethyl Ether from Biomass-Derived Syngas over Cuo-Zno-Mox (M = Zr, Al, Cr, Ti)/Hzsm-5 Hybrid Catalyst: Effects of Mox

Pd/CNT-promoted CuZrO2/HZSM-5 hybrid catalysts for direct synthesis of DME from CO2/H2

A NOVEL PREPARETION OF Cu-Mn CATALYSTS FOR DIMETHYL ETHER SYNTHESIS FROM SYNGAS

Dimethyl ether steam reforming for hydrogen production over Cu-Ni/λ-Al2O3 Bi-Functional catalyst

Effect of copper content on Cu–Mn–Zn/zeolite-Y catalysts for the synthesis of dimethyl ether from syngas

Ethanol As a Binder to Fabricate a Highly‐Efficient Capsule‐Structured CuO−ZnO−Al2O3@HZSM‐5 Catalyst for Direct Production of Dimethyl Ether from Syngas

Dimethyl Ether Steam Reforming For Hydrogen Production On Cuo/Zno/Y2o3/Gamma-Al2o3 Bi-Functional Catalyst

Effect of the Hydrogenation Components on Copper-Based Catalysts for Synthesis of Dimethyl Ether from CO2 Hydrogenation

Preparation, Structure And Performance Of [Cuo-Zno-Al2o3]/[Hzsm-5] Core-Shell Bifunctional Catalysts For One-Step Synthesis Of Dimethyl Ether From Co2+H-2

Multifunctional Catalytic Synergy in the Dimethyl Ether Synthesis Process

99/00320 Effect of oxide dispersion in a bifunctional catalyst on the formation of dimethyl ether

Synergistic Effect of Zinc and Manganese in Cu-Mn-Zn/Y Catalyst for Syngas-to-dimethyl Ether

Low-temperature synthesis of DME from CO2/H2 over Pd-modified CuO–ZnO–Al2O3–ZrO2/HZSM-5 catalysts

Characterization of Cu-Mn/Zeolite-Y Catalyst for One-Step Synthesis of Dimethyl Ether from Co-H-2