Abstract:The effect of manganese on the dispersion, reduction behavior and active states of surfaces of γ-Al2O3 supported copper catalysts was investigated by X-ray powder diffraction (XRD), temperature-programmed reduction (TPR) and XPS technologies. The relationship between the area of metallic copper and the activity of dimethyl ether (DME) synthesis from CO/H2 was also investigated. The catalytic activity over Cu-MnOx/γ-Al2O3 catalyst for CO hydrogenation is higher than that of Cu/γ-Al2O3. The adding of manganese increases the dispersion of the supported copper oxide. For the CuO/γ-Al2O3 catalyst, there are two reducible copper oxide species; α- and β-peaks are attributed to the reduction of highly dispersed copper oxide species and bulk CuO species, respectively. For the CuO-MnOx/γ-Al2O3 catalyst, four reduction peaks are observed. The α-peak is attributed to the reduction of high dispersed copper oxide species; β-peak is ascribed to the reduction of bulk CuO; γ-peak is ascribed to the high-dispersed CuO interacting with Mn; and δ-peak is attributed to the reduction of the manganese oxide interacting with copper oxide. XPS results showed that Cu+ mostly existed on the working surface of the Cu-Mn/γ-Al2O3 catalysts. Cu promoted the catalytic activity with positive charge, which was formed by means of long path exchange function between CuOMn. These results indicate that there are synergistic interactions between the copper and manganese oxide, which are responsible for the high activity of CO hydrogenation.

Effect of copper content on Cu–Mn–Zn/zeolite-Y catalysts for the synthesis of dimethyl ether from syngas

Effect of the Addition of Manganese and Zinc on the Properties of Copper-Based Catalyst for the Synthesis of Syngas to Dimethyl Ether

Characterization of Cu-Mn/Zeolite-Y Catalyst for One-Step Synthesis of Dimethyl Ether from Co-H-2

Synergistic Effect of Zinc and Manganese in Cu-Mn-Zn/Y Catalyst for Syngas-to-dimethyl Ether

Effect of the Content of Metallic Component on Cu-Mn-Zn/Y Catalysts for Direct Synthesis of DME

Effect of the Hydrogenation Components on Copper-Based Catalysts for Synthesis of Dimethyl Ether from CO2 Hydrogenation

A NOVEL PREPARETION OF Cu-Mn CATALYSTS FOR DIMETHYL ETHER SYNTHESIS FROM SYNGAS

DME Synthesis From CO/H 2 over Cu-Mn/Ă-Al 2 O 3 Catalyst

DME Synthesis From CO/H<sub>2</sub> over Cu-Mn/Ă-Al<sub>2</sub>O<sub>3</sub> Catalyst

Dme Synthesis From Co/H-2 Over Cu-Mn/Gamma-Al2o3 Catalyst

Synthesis of Dimethyl Ether on Supported Cu-Mn Catalysts

HYDROGENATION ON SUPPORTED Cu-Mn-ZnOX CATALYST--EFFECT OF PREPARATION METHOD AND REACTION CONDITIONS

Effect of Composition of Raw Materials on Structure and Dimethyl Ether Synthesis Activity of Cu-Zn-Al Catalyst Prepared by Complete Liquid Phase Method

Dimethyl Ether Synthesis Via Methanol and Syngas over Rare Earth Metals Modified Zeolite Y and Dual Cu–Mn–Zn Catalysts

Dimethyl Ether Synthesis from Methanol and Syngas over Different Sized HY Zeolite and Cu-Mn-Zn/HY Bifunctional Catalyst

Synthesis of Dimethyl Ether (DME) on Modified HY Zeolite and Modified HY Zeolite-Supported Cu–Mn–Zn Catalysts

Direct Synthesis of Dimethyl Ether on Supported Cu-Mn Catalysts

Mechanism and catalytic performance for direct dimethyl ether synthesis by CO2 hydrogenation over CuZnZr/ferrierite hybrid catalyst

A novel catalyst for DME synthesis from CO hydrogenation 1. Activity, structure and surface properties

Dimethyl Ether Synthesis from CO2 Hydrogenation on a CuO−ZnO−Al2O3−ZrO2/HZSM-5 Bifunctional Catalyst