Abstract:The chemoselective synthesis of ethylene glycol (EG) from the hydrogenation of dimethyl oxalate (DMO) derived from syngas is an attractive technology in the modern chemical industry. This work reported a novel hydrolysis precipitation (HP) method to efficiently tune the active copper species of Cu/SiO2 catalysts for DMO hydrogenation. Characterization techniques such as N-2 physical adsorption, X-ray diffraction, H-2 temperature programmed reduction, N2O titration, Fourier-transform infrared spectra, transmission electron microscopy, and X-ray photoelectron spectroscopy were employed to reveal the origin of the catalytic performances. Compared to the ammonia evaporation (AE) method, the HP method presented remarkable higher dispersion of copper species and large ratio of Cu+/(Cu+ + Cu-0) on the catalyst surface, resulting in a superior catalytic performance in the hydrogenation of DMO to EG. Moreover, the amount of Cu-0 and Cu+ sites on catalyst surface is dramatically affected by copper loading, and the catalyst with 30% copper showed the highest catalytic activity with a space time yield of 1.74 gEG/ (gcat.h) at 463 K. Meanwhile, the positive correlation between Cu+ surface area and space time yield of EG suggests that the amount Cu+ is the key factor for hydrogenation of DMO to EG on the as-prepared Cu/SiO2 catalyst. The formation of more Cu+ species in the catalyst would enhance the activation of C=0 group in DMO and significantly improve the catalytic performances in DMO hydrogenation. (C) 2016 Elsevier B.V. All rights reserved.

Selective Hydrogenation of CO2 into Dimethyl Ether over Hydrophobic and Gallium-Modified Copper Catalysts

Selective Hydrogenation of Dimethyl Maleate to Tetrahydrofuran over Cu/SiO2 Catalyst: Effect of Cu+ on the Catalytic Performance

Theoretical Investigation on the CO2 Hydrogenation to Methanol Mechanism at Electron-Rich Active Interface over Cu/Ga-Ti-Al-O Catalyst

Optimizing CO 2 Hydrogenation to DME through Tailored Interfacial Interactions: Weakening Synergy in CuZnZr and Al-Modified SBA-15 Catalysts

Continuous Heterogeneous Hydrogenation of Co2-Derived Dimethyl Carbonate to Methanol over A Cu-Based Catalyst

Direct Synthesis of Dimethyl Ether on Supported Cu-Mn Catalysts

Highly Active and Selective Copper-Containing Hms Catalyst in the Hydrogenation of Dimethyl Oxalate to Ethylene Glycol

Dimethyl Ether Synthesis from CO2 Hydrogenation on a CuO−ZnO−Al2O3−ZrO2/HZSM-5 Bifunctional Catalyst

Mechanism and catalytic performance for direct dimethyl ether synthesis by CO2 hydrogenation over CuZnZr/ferrierite hybrid catalyst

Dme Synthesis From Co/H-2 Over Cu-Mn/Gamma-Al2o3 Catalyst

Effect of the Hydrogenation Components on Copper-Based Catalysts for Synthesis of Dimethyl Ether from CO2 Hydrogenation

DME Synthesis From CO/H<sub>2</sub> over Cu-Mn/Ă-Al<sub>2</sub>O<sub>3</sub> Catalyst

Catalytic activity for direct CO2 hydrogenation to dimethyl ether with different proximity of bifunctional Cu-ZnO-Al2O3 and ferrierite

Catalysis for One-step Synthesis of Dimethyl Ether from Hydrogenation of CO

Ultra-stable Cu-based catalyst for dimethyl oxalate hydrogenation to ethylene glycol

DME Synthesis From CO/H 2 over Cu-Mn/Ă-Al 2 O 3 Catalyst

Efficient Tuning of Surface Copper Species of Cu/SiO2 Catalyst for Hydrogenation of Dimethyl Oxalate to Ethylene Glycol

CuO-In2O3 Catalysts Supported on Halloysite Nanotubes for CO2 Hydrogenation to Dimethyl Ether

Non‐oxidative conversion of methanol to dimethyl ether, methyl formate and dimethoxymethane over Cu/Hβ catalyst: Tailoring product selectivity

Enhanced catalytic stability of Cu-based catalyst for dimethyl oxalate hydrogenation

Dehydrogenation of Ethane to Ethylene over a Highly Efficient Ga2O3/HZSM-5 Catalyst in the Presence of CO2