Abstract:Hydrogenation of CO 2 to dimethyl ether (DME) is an effective measure to deal with global climate change and solve the shortage of energy supply and demand. A series of CuZn/HZ bifunctional catalysts were prepared using CuZn bimetallic coordination polymer as the precursor by in-situ introduction method and physical blend. The in situ introduction method increases the interaction between Cu, ZnO, and HZSM-5, thereby providing a close contact environment between the metal and the acidic site. It is demonstrated that the synergistic effect of metal active sites and acid dehydration sites can increase the production of methanol and DME during CO 2 conversion. CuZn/HZ-IS-AC catalyst prepared by in situ introduction of ammonia-citric acid-modified HZSM-5 has more Cu-ZnO interfaces and basic sites, thus improving the adsorption and activation of CO 2 . Moreover, CuZn/HZ-IS-AC catalyst with hierarchical structure is more conducive to product diffusion and DME selectivity. Compared with the catalyst prepared by the physical method, the CuZn/HZ-IS-AC catalyst prepared by in situ introduction method has excellent catalytic properties with the CO 2 conversion rate of 31.2 % and the DME selectivity of 50.6 % at 260 °C and 3.0 MPa. In situ DRIFTS analysis showed that abundant formate intermediates and high CO 2 adsorption capacity were favorable for CO 2 hydrogenation. Therefore, the catalyst constructed on the microstructure can realize the efficient coupling of metal actives and the acidic site, the acid-base regulation and effectively improved the catalytic properties of CO 2 hydrogenation.

DME synthesis from carbon dioxide and hydrogen over Cu–Mo/HZSM-5

Enhanced Selective Hydrogenation of CO2 to CH4 on Molybdenum Carbide Hollow Sphere Catalyst

DME Synthesis From CO/H<sub>2</sub> over Cu-Mn/Ă-Al<sub>2</sub>O<sub>3</sub> Catalyst

DME Synthesis From CO/H 2 over Cu-Mn/Ă-Al 2 O 3 Catalyst

Dimethyl Ether Synthesis from CO2 Hydrogenation on a CuO−ZnO−Al2O3−ZrO2/HZSM-5 Bifunctional Catalyst

Dme Synthesis From Co/H-2 Over Cu-Mn/Gamma-Al2o3 Catalyst

Effect of the Hydrogenation Components on Copper-Based Catalysts for Synthesis of Dimethyl Ether from CO2 Hydrogenation

HYDROGENATION ON SUPPORTED Cu-Mn-ZnOX CATALYST--EFFECT OF PREPARATION METHOD AND REACTION CONDITIONS

Enhanced Catalytic Performance of a Single-Atom Cu on Mo2C toward the CO2/CO Hydrogenation to Methanol: A First-Principles Study

Role of the Cu dopant in the textural and catalytic features of the Co/ZnO catalyst for dimethyl oxalate selective hydrogenation

COx hydrogenation to methanol and other hydrocarbons under mild conditions with Mo3S4@ZSM-5

Direct Synthesis of Dimethyl Ether on Supported Cu-Mn Catalysts

A novel bifunctional catalyst obtained by in situ introduction of hierarchically structured HZSM-5 for direct DME synthesis from CO 2 hydrogenation

Catalysis for One-step Synthesis of Dimethyl Ether from Hydrogenation of CO

Optimizing CO 2 Hydrogenation to DME through Tailored Interfacial Interactions: Weakening Synergy in CuZnZr and Al-Modified SBA-15 Catalysts

Mechanism and catalytic performance for direct dimethyl ether synthesis by CO2 hydrogenation over CuZnZr/ferrierite hybrid catalyst

Engineering the Cu/Mo 2 C T x (MXene) interface to drive CO 2 hydrogenation to methanol

Engineering the Cu/Mo2CTx (MXene) interface to drive CO2 hydrogenation to methanol

CuO-In2O3 Catalysts Supported on Halloysite Nanotubes for CO2 Hydrogenation to Dimethyl Ether

A novel catalyst for DME synthesis from CO hydrogenation 1. Activity, structure and surface properties

Dimethyl Ether Synthesis from Co2 Hydrogenation over Cuo-Tio2-Zro2/Hzsm-5 Catalysts