Abstract:Acoustical methods are playing an important role for nondestructive evaluation (NDE) of adhesive-bonded composites and components in industrial applications. A dual-frequency ultrasonic technique is proposed for the quantitative evaluation of contact strength between pressed solid surfaces. An ultrasonic excitation consists of two primary frequency components is applied perpendicular to the interface, and the transmitted wave is examined. Theoretical study is based on a perturbation analysis of contact acoustic nonlinearity (CAN) model, predicting the generation of difference and sum frequency waves, together with the second harmonics. Nonlinear parameters are defined to describe the nonlinearity generation efficiencies. Experiments are performed for three types of interfaces, i. e. the interfaces of two aluminum alloy blocks with and without couplant and two glass blocks. The difference frequency wave component has bigger generation efficiency than other nonlinear components, which offers an advantage of high SNR and good detection capability of contact stiffness (interfacial stiffness). For each interface, the first and second-order interfacial stiffness are measured with contact pressure increasing from near zero to about 0.8 MPa with the aid of a laser interferometer. Finally, numerical simulations are also carried out, and a consistency is found between measurements and calculations. The dual-frequency ultrasound sent to the interface generates at least four second-order nonlinear components, which enriches the CAN technique for interface quality examinations. Both measured and simulated results indicate an increase of interfacial stiffness and decrease of nonlinear parameters with growing contact pressure. Moreover, measured results show that couplant between interfaces influences the contact stiffness evaluations in an enhanced manner, while the contact pressure determined by measured interfacial stiffness values are underestimated due to the couplant. The main problem comes from the contact between the transducersample interfaces, which brings extra nonlinearity to the detected signals and affect the accuracy of measuring. Copyright© (2010) by the International Congress on Acoustics.

Study of Ultrasonic Propagation Characters at Contact Interface in Ultrasonic Transducer

Research on the Non-Contact Manipulation of Biomaterials in the Stationary Sound Field of Ultrasonic Transducers

Surface Wave Transducer for Ultrasonic Nondestructive Testing of Polymer Components

Numerical Simulation of the Ultrasonic Pulse Wave Propagation at Solid-Solid Interface

Development and Prospect of Ultrasonic Bonding Transducer

Numerical and Experimental Evaluation of Ultrasonic Wave Propagation Characteristics at Contact Interface

A novel ultrasonic solid coupling inspection model based on interface total load capacity

Finite element analysis on ultrasonic propagation of interface bonding of bimetal composites

Evaluation of contact stiffness between solid-solid interfaces using dual-frequency ultrasound

Finite-Element Simulation Of Contact-Impact Dynamics For High-Power Ultrasonic Processing System

Experimental Investigation on Friction Characteristics of Ultrasonic Motor

Quantitative Evaluation of Contact Stiffness Between Pressed Solid Surfaces Using Dual-Frequency Ultrasound

Effects of interface bonding on acoustic wave generation in an elastic body by surface-mounted piezoelectric transducers.

Contact acoustic nonlinearity in a bonded solid–solid interface

Nonlinear interaction between ultrasound and solid rough interface

Influence of Adhesive Layer Properties on Laser-Generated Ultrasonic Waves in Thin Bonded Plates

Ultrasonic measurement of contact stress at metal-to-metal interface based on a real rough profile through modeling and experiment

Simulation Of Three Constitutive Behaviors Based On Nonlinear Ultrasound

Development of non-destructive bond monitoring techniques for ultrasonic bonders

A Reflective Nonlinear Acoustic Microscope to Contour the Quantitative Adhesion at A Bonded Solid-Solid Interface

Design and experimental study of longitudinal-torsional ultrasonic transducer with helical slots considering the stiffness variation