Abstract:Acoustical methods are playing an important role for nondestructive evaluation (NDE) of adhesive-bonded composites and components in industrial applications. A dual-frequency ultrasonic technique is proposed for the quantitative evaluation of contact strength between pressed solid surfaces. An ultrasonic excitation consists of two primary frequency components is applied perpendicular to the interface, and the transmitted wave is examined. Theoretical study is based on a perturbation analysis of contact acoustic nonlinearity (CAN) model, predicting the generation of difference and sum frequency waves, together with the second harmonics. Nonlinear parameters are defined to describe the nonlinearity generation efficiencies. Experiments are performed for three types of interfaces, i. e. the interfaces of two aluminum alloy blocks with and without couplant and two glass blocks. The difference frequency wave component has bigger generation efficiency than other nonlinear components, which offers an advantage of high SNR and good detection capability of contact stiffness (interfacial stiffness). For each interface, the first and second-order interfacial stiffness are measured with contact pressure increasing from near zero to about 0.8 MPa with the aid of a laser interferometer. Finally, numerical simulations are also carried out, and a consistency is found between measurements and calculations. The dual-frequency ultrasound sent to the interface generates at least four second-order nonlinear components, which enriches the CAN technique for interface quality examinations. Both measured and simulated results indicate an increase of interfacial stiffness and decrease of nonlinear parameters with growing contact pressure. Moreover, measured results show that couplant between interfaces influences the contact stiffness evaluations in an enhanced manner, while the contact pressure determined by measured interfacial stiffness values are underestimated due to the couplant. The main problem comes from the contact between the transducersample interfaces, which brings extra nonlinearity to the detected signals and affect the accuracy of measuring. Copyright© (2010) by the International Congress on Acoustics.

Contact acoustic nonlinearity in a bonded solid–solid interface

A Unique Method to Describe the Bonding Strength in a Bonded Solid–Solid Interface by Contact Acoustic Nonlinearity

Nondestructive Characterization of Quantitative Bonding Strength at A Bonded Solid-Solid Interface

A Reflective Nonlinear Acoustic Microscope to Contour the Quantitative Adhesion at A Bonded Solid-Solid Interface

Analytical Solution for Externally Bonded Joints Considering Snap-Back

Evaluation of contact stiffness between solid-solid interfaces using dual-frequency ultrasound

Interfacial Debonding Detection for Steel-Concrete Composite Structures Part II: Scanning Doppler Laser-Based MASW and Microphone Combination-Based Impact-Acoustic Vibration

Interfacial Debonding Detection for Steel-Concrete Composite Structures Part I: Benchmark Test and Signal Calibration of Contact and Non-Contact Measurement

Finite element analysis on ultrasonic propagation of interface bonding of bimetal composites

An elastic-plastic cohesive zone model for metal-ceramic interfaces at finite deformations

Experimental research on bonding mechanical performance of the interface between cementitious layers

Experimental investigation on interfacial defect detection for SCCS with conventional and novel contact NDT techniques

Contact acoustic nonlinearity effect on the vibro-acoustic modulation of delaminated composite structures

Experimental and Calculative Research on the Dynamic Bond Strength of the Interface Between Steel and Cement Mortar

Development of non-destructive bond monitoring techniques for ultrasonic bonders

Study and Measurement of Micro-Scale Bonding Strength in Vertical Direction

Effects of roughness on shear properties and acoustic emission characteristics of bonded Rock-Concrete interfaces

Non‐destructive testing method of micro‐debonding defects in composite insulation based on high power ultrasonic

Interfacial closure of contacting surfaces

Porosity estimation of a micro-cracked adhesive interface by μCT scanning: Comparison between experimentally measured effective stiffnesses and those predicted by an imperfect interface model

Nondestructive Evaluation of Bond Quality of Adhesively Joined Carbon Fiber/nylon 6 Composites