Abstract:Amorphous Fe73.5-xCoxSi13.5B9Cu1Nb3（x=10,30,50） ribbons were prepared by the single copper wheel melt spinning technique in the air atmosphere.The nanocrystallization kinetics of amorphous ribbons was investigated by differential scanning calorimetry（DSC）.The apparent activation energies of amorphous ribbons were calculated by using Kissinger and Ozawa methods.It was found that the activation energies of the first crystallization reduce and those of the second crystallization rise with increasing Co content.The local Avrami parameter m for primary crystallization was calculated using Johnson-Mehl-Avrami（JMA） model.The values of the Avrami parameter showed that the primary crystallization mechanism of amorphous ribbons varied at different stages.In the initial stage,the crystallization mechanism was bulk crystallization with three dimensional nucleation and grain growth controlled by diffusion.In the following stage,it was surface crystallization with one dimensional nucleation and grain growth at a near zero nucleation rate.The variation of soft magnetic properties of nanocrystalline Fe63.5Co10Si13.5B9Cu1Nb3 powder cores as a function of milling time has been investigated.It was found that the effective permeability of the cores shows high frequency stability and decreases with increasing milling time.The quality factor increases with increasing frequency in the lower frequency range,reaches a maximum at the frequency of 80 kHz,and then decreases gradually with increasing frequency.

Ion Beam Induced Growth of Amorphous Alloy Films in the Co–Nb System During Ion Beam Assisted Deposition

Amorphization in the Ni–Nb System Upon Ion-Beam-Assisted Deposition

Formation of Metastable Alloy Films in the Ni-Mo Binary System by Ion-Beam-assisted Deposition

Amorphization and Phase Evolution in Fe–Nb Films Prepared by Ion Beam Assisted Deposition

Amorphization in Nb-M (M=Fe, Co, Ni) binary metal systems induced by ion beam assisted deposition (IBAD)

Amorphous Phase and Anisotropy Induced by Glancing Incident Ion Beams in Co–Nb Films

Ion beam induced formation of metastable alloy phases in Cu–Mo system during ion beam assisted deposition

Amorphization In The Immiscible Cu/Ta And Cu/Nb Multilayers By Ion Beam Assisted Deposition

Metastable phases formation in Cu–Nb films by ion-beam-assisted deposition

Solid State Phase Transition Induced by Ion Irradiation in the Co-Nb System: Experiments and Thermodynamics

Growth of amorphous alloy films by ion beam assisted deposition

Structures and Magnetic Moments of Co–Ag Alloy Films Prepared by Ion Beam Assisted Deposition at Various Ion Incidence Angles

Different Alloying Behaviors of Co-Mo Multilayered Films Upon Ion Irradiation and Thermal Annealing

Microstructures of Nb–Ti Alloy Films Prepared by Ion Beam Assisted Deposition

Unusual Alloying Behavior Observed in the Immiscible AgMo and AgNb Systems under Ion Irradiation

Effects of Incidence Angles on the Microstructure of Co–Nb Thin Films Prepared by Ion Beam Assisted Deposition

Influence of ion beam incident angle on microstructures and thermal stability of Co30Nb70 films

Formation of Amorphous Phases in an Immiscible Cu–Nb System Studied by Molecular Dynamics Simulation and Ion Beam Mixing

Nanoindentation study of Ni45Nb55 amorphous films prepared by ion beam assisted deposition

A New Hcp Phase Formed in the Ni-Nb System During Ion-beam-assisted Deposition

Crystallization Kinetics of Co-Finemet Amorphous Alloys and Magnetic Properties of Nanocrystalline Powder Cores