Abstract:In this study, we employed a solid-state reaction method to synthesize Ca0.25Cu0.75-xAlxTiO3 ceramics, investigating the impact of Al doping at concentrations of x=0 and 0.0125. Notably, all ceramics exhibited a primary phase of Ca0.25Cu0.75TiO3. The addition of Al3+ induced a significant increase in grain size. Density functional theory analyses revealed a preferential occupation of Cu sites by Al, leading to liquid-phase sintering processes attributed to excess Cu. Moreover, it was also found from DFT that the Al dopant cannot induce an oxygen vacancy in the lattice. Charge density analysis revealed that Cu+ and Ti3+ observed via XPS originate from the presence of an oxygen vacancy. The Ca0.25Cu0.7375Al0.0125TiO3 ceramic exhibited a very high dielectric permittivity of 9.23×104 and a low dielectric loss tangent of 0.057 at 1 kHz and room temperature. Importantly, the dielectric permittivity exhibited impressive stability over a temperature range of -60 °C to 110 °C, perfectly meeting the practical requirements for utilization in X6R ceramic capacitors. Our investigation indicates that the improved dielectric properties may be attributed to enhanced grain boundary responses, influenced by oxygen enrichment and the presence of metastable insulating layers at grain boundaries. Combining experimental findings with theoretical evidence, our study elucidates that the excellent dielectric properties of the Ca0.25Cu0.7375Al0.0125TiO3 ceramic originate from an extrinsic effect arising from grain boundary enhancement. This work not only contributes to advancing the understanding of the underlying mechanisms governing dielectric behavior in doped ceramics, but also emphasizes the potential of Ca0.25Cu0.7375Al0.0125TiO3 as a promising material for applications demanding superior dielectric performance.

An Effective Method to Decrease Dielectric Loss of CaCu3Ti4O12 Ceramics

Decrease of Dielectric Loss in Giant Dielectric Constant CaCu3 Ti4 O12 Ceramics by Adding CaTiO3

Decrease of Dielectric Loss in CaCu3Ti4O12 Ceramics by La Doping

Strontium doped CaCu3Ti4O12 ceramics with very low dielectric loss synthesized by the sol–gel method

A novel route to lower the dielectric loss in CaCu$_{3}$Ti$_{4}$O$_{12}$ ceramics

Reduction of the sintering temperature and dielectric loss of the CCTO ceramic by doping tellurite glass

Influence of sintering temperature on giant dielectric property of CaCu3Ti4O12

Enhanced breakdown strength and dielectric loss of Ca1−3x/2EuxCu3Ti4O12 ceramics prepared by polymer pyrolysis

Effect of calcium stoichiometry on the dielectric response of CaCu3Ti4O12 Ceramics

Enhanced breakdown properties and dielectric loss of CaCu3Ti4O12 ceramics via SrO minor addition

Effect of Al substitution and secondary CuO phase on dielectric response in microwave-processed CaCu3Ti4−xAlxO12 ceramics

Improved dielectric properties of CaCu3−xSnxTi4O12 ceramics with high permittivity and reduced loss tangent

Pressure Induced Dielectric Constant Suppression In Cacu3ti4o12 Ceramics

Colossal Permittivity and Ultralow Dielectric Loss in Nb-doped SrTiO 3 Ceramics

Ti deficiency effect on the dielectric response of CaCu3Ti4O12 ceramics

Improved grain boundary resistance inducing decreased dielectric loss and colossal permittivity in Y2/3Cu3Ti4O12 ceramics

Dielectric Properties of the Ca0.25Cu0.75-xAlxTiO3 Ceramics: Experimental and Computational Investigations

The Effect of TiO2 on the Dielectric Performance of ZrO2 and Nb2O5 Pre-Doped CaCu3Ti4O12 Ceramics

Optimization of dielectric loss in calcium copper titanate based on different doping modification strategies

Effect of Europium Addition on the Microstructure and Dielectric Properties of CCTO Ceramic Prepared Using Conventional and Microwave Sintering

Microstructure and Dielectric Properties of Ca1–3/2xBixCu3Ti4O12 (x = 0, 0.05, 0.10, 0.15 and 0.20) Ceramics