Abstract:Colossal permittivity ceramic materials (CP, >10 3 ) have the potential of miniaturization and convenience for electric components. Unfortunately, they are often accompanied by high dielectric loss (>0.5), which limits their application. In this work, Ti 1- x (Tm 0.5 Nb 0.5 ) x O 2 (TTNO x ) ceramics are prepared via the solid state method. The results show that the main phase of doped samples maintains the rutile TiO 2 phase and the average grain size decreases with increasing additive amounts. Gradually, the Tm 2 Ti 2 O 7 phase appears and subsequently it is converted to the TmNbTiO 6 phase. Furthermore, the low dielectric loss and colossal permittivity are synchronously achieved in doped ceramic samples by defect regulation. Especially, high permittivity of ∼1.61 × 10 5 , low dielectric loss of ∼0.078 (1 kHz) and the AC resistivity of ∼10 −9 s/cm are achieved in x = 0.01 samples at room temperature with good frequency and temperature stability. The true origin is deeply discussed by some analyses of XRD, XPS, SEM, Raman spectra and the complex impedance. The results show that enhanced dielectric performance originates from this fact that the addition of Nb and Tm ions triggers defective dipoles formation in grains, such as TiTi′/TmTi′−VO..−TiTi′/TmTi′ , TiTi′/TmTi′−NbTi∙ , pinning the electron and limiting its long-range transition. Furthermore, the grain boundary resistivity is crucial to the ceramic conductivity. This study has driving implications for the application of colossal permittivity ceramic materials.

Colossal Permittivity and Ultralow Dielectric Loss in Nb-doped SrTiO 3 Ceramics

High dielectric permittivity and ultralow dielectric loss in Nb-doped SrTiO 3 ceramics

Colossal Dielectric Permittivity in (al+nb) Co-Doped Ba0.4Sr0.6TiO3 Ceramics

Colossal permittivity and ultralow dielectric loss in SrTi1-Nb O3 ceramics sintered at different atmospheres via defect chemistry improvement

Colossal permittivity and low dielectric loss in (Li, Nb) co-doped SrTiO3 ceramics with high frequency and temperature stability

Enhanced dielectric performance of Niobium and Thulium modified rutile TiO 2 ceramics by defect regulation

Novel SrTiO 3 -based ceramics with colossal permittivity, low dielectric loss, and high insulation resistivity via defect engineering

High Insulation Resistivity and Ultralow Dielectric Loss in La-Doped SrTiO3 Colossal Permittivity Ceramics through Defect Chemistry Optimization

Colossal Dielectric Performance of Pure Barium Titanate Ceramics Consolidated by Spark Plasma Sintering

Synthesis and characterization of (sm, Al) co-doped SrTiO3 with giant dielectric constant and low dielectric loss through defect engineering design

Anti-occupation Defect Dipole and Gradient Interface Induced Excellent Giant Permittivity in Sr0.95Bi0.05TiO3 Ceramics

Colossal Permittivity Characteristics of (Nb, Si) Co-Doped TiO2 Ceramics

Ultralow dielectric loss in Y‐doped SrTiO 3 colossal permittivity ceramics via designing defect chemistry

Giant permittivity in Nb-doped SrTiO3 single crystal: Compositional gradient and local structure

Simultaneously Achieving Colossal Permittivity, Ultralow Dielectric Loss Tangent, and High Insulation Resistivity in Er-Doped SrTiO 3 Ceramics via Oxygen Vacancy Regulation

Effects of structural defects on dielectric properties of Nb-doped SrTiO3-based ceramics

Defect engineering in rare‐earth‐doped BaTiO 3 ceramics: Route to high‐temperature stability of colossal permittivity

Giant permittivity in (Nb0.5La0.5)xTi1‐xO2 ceramics prepared by slip casting in a strong magnetic field

X9R-type SrTiO 3 based ceramics with colossal dielectric permittivity and low loss derived from defect engineering and high-energy ball milling

High-performance colossal permittivity for textured (Al+Nb) co-doped TiO2 ceramics sintered in nitrogen atmosphere

Colossal dielectric behavior of Nb-doped SrTiO 3 single crystal