Abstract:Environmentally friendly lead-free dielectric ceramics have attracted wide attention because of their outstanding power density, rapid charge/dischargerate, and superior stability. Nevertheless, as a hot material in dielectric ceramic capacitors, the energy storage performance of Na0.5Bi0.5TiO3-based ceramics has been not satisfactory because of their higher remnant polarization value and low dielectric breakdown strength, which is a problem that must be urgently overcome. In this work, the (1 - x) (0.6Na0.5Bi0.5TiO3 - 0.4Sr0.7Bi0.2TiO3) - xBa(Mg1/3Ta2/3)O3 (BNST-xBMT) systems were designed based on a dual optimization strategy of domain and bandgap to solve the above problems. As a result, a record-breaking ultrahigh energy density and excellent efficiency (Wrec = 8.58 J/cm3, η = 93.5%) were obtained simultaneously under 565 kV/cm for the BNST-0.08BMT ceramic. The introduction of Sr0.7Bi0.2TiO3 induces the formation of nanodomains in BNT-based ceramics, leading to slim P-E curves, and the further modification of Mg/Ta reduces the grain sizes and increases the bandgap width, resulting in significant enhancement of the dielectric breakdown strength. Moreover, excellent stability and superior discharge performance (Wd = 4.7 J/cm3, E = 320 kV/cm) in the BNST-0.08BMT ceramic were also achieved. The results suggest that the BNST-0.08BMT ceramic shows potential applicability for dielectric energy storage ceramics. Simultaneously, the composition-design concept in the system provides a good reference for the further development of ceramic dielectric capacitors.

Anti-occupation Defect Dipole and Gradient Interface Induced Excellent Giant Permittivity in Sr0.95Bi0.05TiO3 Ceramics

High Capacitance-Temperature Sensitivity and "giant" Dielectric Constant in Srtio3

Colossal Dielectric Permittivity in (al+nb) Co-Doped Ba0.4Sr0.6TiO3 Ceramics

Synthesis and characterization of (sm, Al) co-doped SrTiO3 with giant dielectric constant and low dielectric loss through defect engineering design

Colossal Permittivity and Ultralow Dielectric Loss in Nb-doped SrTiO 3 Ceramics

Defect Dipoles Induced High‐energy Storage Density in Mn‐doped BST Ceramics Prepared by Spark Plasma Sintering

Enhanced low electric-field energy-storage performance in Ba0.9Sr0.1TiO3-Bi(Mg1/2Ti1/2)O-3 ceramics

Structure, Dielectric Behaviours, Enhanced Polarization Responses and Energy Storage Properties in (1 − X )srtio 3 – X Bi(Mg 1/2 Ti 1/2 )O 3 Ceramics

Colossal Dielectric Performance of Pure Barium Titanate Ceramics Consolidated by Spark Plasma Sintering

Novel SrTiO 3 -based ceramics with colossal permittivity, low dielectric loss, and high insulation resistivity via defect engineering

Improving Energy Storage Properties in (ba0.75sr0.1bi0.1)(ti0.9zr0.1)o3 Ceramic Thick Films by Adding (sb0.5li0.5)tio3, Domain Engineering and Defect Engineering

Colossal permittivity and defect-dipoles contribution for Ho0.02Sr0.97TiO3 ceramics

High Insulation Resistivity and Ultralow Dielectric Loss in La-Doped SrTiO3 Colossal Permittivity Ceramics through Defect Chemistry Optimization

Origin of ultrahigh thermal stability on dielectric permittivity and dipole glass-like behavior of 0.4Ba0.8Ca0.2TiO3-0.6Bi(Mg0.5Ti0.5)O3 based ceramics

Defect engineering in rare‐earth‐doped BaTiO 3 ceramics: Route to high‐temperature stability of colossal permittivity

Simultaneously Achieving Colossal Permittivity, Ultralow Dielectric Loss Tangent, and High Insulation Resistivity in Er-Doped SrTiO 3 Ceramics via Oxygen Vacancy Regulation

Effect of Dy2O3 content on the dielectric, ferroelectric, and energy storage properties of lead-free 0.5Na0.5Bi0.5TiO3–0.5SrTiO3 bulk ceramics

Colossal permittivity and low dielectric loss in (Li, Nb) co-doped SrTiO3 ceramics with high frequency and temperature stability

Ultralow dielectric loss in Y‐doped SrTiO 3 colossal permittivity ceramics via designing defect chemistry

Ultrahigh Energy Storage Density and Efficiency in Bi 0.5 Na 0.5 TiO 3 -Based Ceramics via the Domain and Bandgap Engineering

Giant permittivity and low dielectric loss of Fe doped BaTiO3 ceramics: Experimental and first-principles calculations