Abstract:In this study, we employed a solid-state reaction method to synthesize Ca0.25Cu0.75-xAlxTiO3 ceramics, investigating the impact of Al doping at concentrations of x=0 and 0.0125. Notably, all ceramics exhibited a primary phase of Ca0.25Cu0.75TiO3. The addition of Al3+ induced a significant increase in grain size. Density functional theory analyses revealed a preferential occupation of Cu sites by Al, leading to liquid-phase sintering processes attributed to excess Cu. Moreover, it was also found from DFT that the Al dopant cannot induce an oxygen vacancy in the lattice. Charge density analysis revealed that Cu+ and Ti3+ observed via XPS originate from the presence of an oxygen vacancy. The Ca0.25Cu0.7375Al0.0125TiO3 ceramic exhibited a very high dielectric permittivity of 9.23×104 and a low dielectric loss tangent of 0.057 at 1 kHz and room temperature. Importantly, the dielectric permittivity exhibited impressive stability over a temperature range of -60 °C to 110 °C, perfectly meeting the practical requirements for utilization in X6R ceramic capacitors. Our investigation indicates that the improved dielectric properties may be attributed to enhanced grain boundary responses, influenced by oxygen enrichment and the presence of metastable insulating layers at grain boundaries. Combining experimental findings with theoretical evidence, our study elucidates that the excellent dielectric properties of the Ca0.25Cu0.7375Al0.0125TiO3 ceramic originate from an extrinsic effect arising from grain boundary enhancement. This work not only contributes to advancing the understanding of the underlying mechanisms governing dielectric behavior in doped ceramics, but also emphasizes the potential of Ca0.25Cu0.7375Al0.0125TiO3 as a promising material for applications demanding superior dielectric performance.

Decrease of Dielectric Loss in Giant Dielectric Constant CaCu3 Ti4 O12 Ceramics by Adding CaTiO3

Low-Temperature Firing And Microwave Dielectric Properties Of Ca[(Li0.33nb0.67)(0.9)Ti-0.1]O3-Delta Ceramics With Lif Addition

Ti deficiency effect on the dielectric response of CaCu3Ti4O12 ceramics

Influence of sintering temperature on giant dielectric property of CaCu3Ti4O12

Decrease of Dielectric Loss in CaCu3Ti4O12 Ceramics by La Doping

Observation of giant dielectric constant in CdCu3Ti4O12 ceramics

Microstructure-dependent Giant Dielectric Response in CaCu3Ti4O12 Ceramics

Enhancement of Giant Dielectric Response in CaCu3Ti4O12 Ceramics by Zn Substitution

Investigation of the Size Effect on the Giant Dielectric Constant of CaCu 3 Ti 4 O 12 Ceramic

A novel route to lower the dielectric loss in CaCu$_{3}$Ti$_{4}$O$_{12}$ ceramics

Effect of Barrier Capacity on Dielectric Characteristics of Acu(3)Ti(4)O(12) Ceramics

Enhanced Giant Dielectric Response in Mg-substituted CaCu3Ti4O12 Ceramics

Structure and modified giant dielectric response in CaCu3(Ti1−xSnx)4O12 ceramics

Dielectric Properties of the Ca0.25Cu0.75-xAlxTiO3 Ceramics: Experimental and Computational Investigations

Pressure Induced Dielectric Constant Suppression In Cacu3ti4o12 Ceramics

Effect of calcium stoichiometry on the dielectric response of CaCu3Ti4O12 Ceramics

Enhanced breakdown strength and dielectric loss of Ca1−3x/2EuxCu3Ti4O12 ceramics prepared by polymer pyrolysis

Anti-reduction of Ti4+ and improved quality factor in Cu-doped Ca0.61Nd0.26TiO3 ceramics

Improved dielectric properties of CaCu3−xSnxTi4O12 ceramics with high permittivity and reduced loss tangent

Investigation Of Size Effect On The Giant Dielectric Cacu3ti4o12 Ceramic