Abstract:Abstract The giant dielectric behavior of CaCu 3 Ti 4 O 12 (CCTO) has been widely investigated owing to its potential applications in electronics; however, the loss tangent (tan δ ) of this material is too large for many applications. A partial substitution of CCTO ceramics with either Al 3+ or Ta 5+ ions generally results in poorer nonlinear properties and an associated increase in tan δ (to ~0.29–1.15). However, first-principles calculations showed that self-charge compensation occurs between these two dopant ions when co-doped into Ti 4+ sites, which can improve the electrical properties of the grain boundary (GB). Surprisingly, in this study, a greatly enhanced breakdown electric field (~200–6588 V/cm) and nonlinear coefficient (~4.8–15.2) with a significantly reduced tan δ (~0.010–0.036) were obtained by simultaneous partial substitution of CCTO with acceptor-donor (Al 3+ , Ta 5+ ) dopants to produce (Al 3+ , Ta 5+ )-CCTO ceramics. The reduced tan δ and improved nonlinear properties were attributed to the synergistic effects of the co-dopants in the doped CCTO structure. The significant reduction in the mean grain size of the (Al 3+ , Ta 5+ )-CCTO ceramics compared to pure CCTO was mainly because of the Ta 5+ ions. Accordingly, the increased GB density due to the reduced grain size and the larger Schottky barrier height ( Φ b ) at the GBs of the co-doped CCTO ceramics were the main reasons for the greatly increased GB resistance, improved nonlinear properties, and reduced tan δ values compared to pure and single-doped CCTO. In addition, high dielectric constant values ( ε ′ ≈ (0.52–2.7) × 10 4 ) were obtained. A fine-grained microstructure with highly insulating GBs was obtained by Ta 5+ doping, while co-doping with Ta 5+ and Al 3+ resulted in a high Φ b . The obtained results are expected to provide useful guidelines for developing new giant dielectric ceramics with excellent dielectric properties.

Optimization of dielectric loss in calcium copper titanate based on different doping modification strategies

Calcium copper titanate a perovskite oxide structure: effect of fabrication techniques and doping on electrical properties—a review

Decrease of Dielectric Loss in CaCu3Ti4O12 Ceramics by La Doping

Reduction of the sintering temperature and dielectric loss of the CCTO ceramic by doping tellurite glass

Synthetic technologies, property enhancements and versatile applications of calcium copper titanate: A review

Improved grain boundary resistance inducing decreased dielectric loss and colossal permittivity in Y2/3Cu3Ti4O12 ceramics

A Short Review on Copper Calcium Titanate (CCTO) Electroceramic: Synthesis, Dielectric Properties, Film Deposition, and Sensing Application

A novel route to lower the dielectric loss in CaCu$_{3}$Ti$_{4}$O$_{12}$ ceramics

Strontium doped CaCu3Ti4O12 ceramics with very low dielectric loss synthesized by the sol–gel method

The Effect of TiO2 on the Dielectric Performance of ZrO2 and Nb2O5 Pre-Doped CaCu3Ti4O12 Ceramics

Research Progress in High Dielectric Constant Ceramic Material CaCu_3Ti_4O_(12)

Enhanced dielectric properties and improved thermal stability in TiO 2 -based ceramics by Cu and Nb co-doping

Enhanced giant dielectric properties and improved nonlinear electrical response in acceptor-donor (Al3+, Ta5+)-substituted CaCu3Ti4O12 ceramics

Perspective on dielectric properties of calcium copper titanate ceramics

Bismuth Oxide Modified Europium and Niobium Co-Doped Titanium Dioxide Ceramics: Colossal Permittivity and Low Dielectric Loss Design

Low dielectric loss, colossal permittivity, and high breakdown electric field in Al-doped Y2/3Cu3Ti4O12 ceramics

Modern Synthesis and Sintering Techniques of Calcium Copper Titanium Oxide (CaCu3Ti4O12) Ceramics and Its Current Trend in Prospective Applications: A Mini-Review

Effect of Al substitution and secondary CuO phase on dielectric response in microwave-processed CaCu3Ti4−xAlxO12 ceramics

High energy storage and colossal permittivity CdCu3Ti4O12 oxide ceramics

Effect of Europium Addition on the Microstructure and Dielectric Properties of CCTO Ceramic Prepared Using Conventional and Microwave Sintering

Enhanced breakdown strength and dielectric loss of Ca1−3x/2EuxCu3Ti4O12 ceramics prepared by polymer pyrolysis