Abstract:AlN-SiC solid solution particles with a variety of morphologies including faceted polyhedrons with or without ledges; hexagonal platelets; hexagonal columns with a hexagonal plate or a pyramidal cap; and interpenetrating cones, have been found in the combustion products of a mixture of Al, Si, and carbon black under a nitrogen pressure of 10 MPa. Combustion temperature (the growth temperature of crystals) is the most important factor controlling the morphology of crystals formed in the combustion product. When temperatures are close to the melting point of the solid solutions, a small driving force for nucleation and long distances of surface migration make nucleation on the basal plane difficult, and thus the solid solution particles tend to grow as platelets. Supersaturation is the second key factor influencing crystal growth. At relatively low temperatures, a low supersaturation at the large pores renders nucleation difficult and the solid solution particles tend to grow as platelets. At relatively low temperatures and high supersaturation, a relatively high driving force for nucleation and short mean distances of surface migration promote the growth of AlN-SiC solid solutions as polyhedrons. The formation of the ledges on the polyhedral particles is attributed to the differences in the evaporation rates and the deposition rates between Al and Si. At relatively low temperatures and an intermediate supersaturation, the solid solution particles grow as prismatic columns. The formation of the prismatic columns with a hexagonal plate, or a pyramidal cap, is attributed to a sudden change of temperature during combustion. A possible growth mechanism for the AlN-SiC solid solution cones is proposed.

Effect of Nitrogen Pressure and Oxygen-Containing Impurities on Self-Propagating High Temperature Synthesis of Si3n4

The Growth Mechanism of Self-Propagating High-Temperature Synthesized Si3N4

Research of Silicon Nitride Powder Prepared by Self-propagating High-temperature Synthesis

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Structural Formation and Mechanism in Combustion Synthesis of Nitrogen Ceramics (AIN, Si<sub>3</sub>N<sub>4</sub> and AIN-SiC)

Effect of Impurities MgO, CaO, Al2O3, AlN and Al on Α/β Ratio in Combustion Synthesis of Α-Si3n4

Effect of nitrogen pressure on combustion synthesis of Si3N4-SiC-TiN ceramic

Synthesis of monodisperse and high-purity α-Si3N4 powder by carbothermal reduction and nitridation

Preheating-assisted Combustion Synthesis of Β-Si3n4 Powders at Low N2 Pressure

Synthesis of Well-Dispersed Columnar Si 3 N 4 Using Carbothermal Reduction–nitridation Method

Characterization of the Interface Region During the Agglomeration of Silicon Nanocrystals in Silicon Dioxide

Effect of the Diluent on Combustion Synthesis of Silicon Nitride

Growth Mechanisms for SiC-AlN Solid Solution Crystals Prepared by Combustion Synthesis

Effect of Additives on Self-Propagating High-Temperature Synthesis of Aln

Combustion Synthesis of Si<sub>3</sub>N<sub>4</sub> from Si/NH<sub>4</sub>Cl at Low Nitrogen Pressure

Microstructure and Thermo‐Kinetics Analysis in Combustion Synthesis of Si3N4 with High α‐Phase Content

Combustion synthesis of α-Si3N4 powders using in-situ nano-SiO2 coated Si and Si3N4 reactants

Combustion Synthesis of Si<sub>3</sub>N<sub>4</sub> from Si/NH<sub>4</sub>Cl at Low Nitrogen Pressure

Preparation of Si 2 N 2 O from Flashing Combustion Synthesized Si 3 N 4 and Silica Fume

Synthesis of Si3N4–TiN–SiC Composites by Combustion Reaction under High Nitrogen Pressures

Liquid-Phase-Assisted Catalytic Nitridation of Silicon and In Situ Growth of α-Si3N4

Effect of Nitrogen Pressure and Oxygen-Containing Impurities on Self-Propagating High Temperature Synthesis of Si3n4

The Growth Mechanism of Self-Propagating High-Temperature Synthesized Si3N4

Research of Silicon Nitride Powder Prepared by Self-propagating High-temperature Synthesis

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Structural Formation and Mechanism in Combustion Synthesis of Nitrogen Ceramics (AIN, Si<sub>3</sub>N<sub>4</sub> and AIN-SiC)

Effect of Impurities MgO, CaO, Al2O3, AlN and Al on Α/β Ratio in Combustion Synthesis of Α-Si3n4

Effect of nitrogen pressure on combustion synthesis of Si3N4-SiC-TiN ceramic

Synthesis of monodisperse and high-purity α-Si3N4 powder by carbothermal reduction and nitridation

Preheating-assisted Combustion Synthesis of Β-Si3n4 Powders at Low N2 Pressure

Synthesis of Well-Dispersed Columnar Si 3 N 4 Using Carbothermal Reduction–nitridation Method

Characterization of the Interface Region During the Agglomeration of Silicon Nanocrystals in Silicon Dioxide

Effect of the Diluent on Combustion Synthesis of Silicon Nitride

Growth Mechanisms for SiC-AlN Solid Solution Crystals Prepared by Combustion Synthesis

Effect of Additives on Self-Propagating High-Temperature Synthesis of Aln

Combustion Synthesis of Si<sub>3</sub>N<sub>4</sub> from Si/NH<sub>4</sub>Cl at Low Nitrogen Pressure

Microstructure and Thermo‐Kinetics Analysis in Combustion Synthesis of Si3N4 with High α‐Phase Content

Combustion synthesis of α-Si3N4 powders using in-situ nano-SiO2 coated Si and Si3N4 reactants

Combustion Synthesis of Si&lt;sub&gt;3&lt;/sub&gt;N&lt;sub&gt;4&lt;/sub&gt; from Si/NH&lt;sub&gt;4&lt;/sub&gt;Cl at Low Nitrogen Pressure

Preparation of Si 2 N 2 O from Flashing Combustion Synthesized Si 3 N 4 and Silica Fume

Synthesis of Si3N4–TiN–SiC Composites by Combustion Reaction under High Nitrogen Pressures

Liquid-Phase-Assisted Catalytic Nitridation of Silicon and In Situ Growth of α-Si3N4

Combustion Synthesis of Si<sub>3</sub>N<sub>4</sub> from Si/NH<sub>4</sub>Cl at Low Nitrogen Pressure