Abstract:In the present work, high-quality MgSiN2 powders were prepared by a combustion synthesis method, based on Mg-Si3N4-N-2 system. The effects of additive content (NH4Cl or NH4F) and N-2 pressure on phase composition and crystal morphology of products were investigated. The results suggested that both NH4Cl and NH4F additives alleviated agglomeration and decreased the grain size of MgSiN2. In addition, NH4Cl did not result in the formation of an extra impurity, while MgF2 residue was found when NH4F was introduced. Therefore, NH4Cl additive was considered as a better choice for the preparation of MgSiN2 powders in comparison with NH4F additive. According to the observation of some MgSiN2 whiskers and notably increased Si content under low N-2 pressure, the pressure of N-2 over 0.5 MPa was essential to have a complete reaction in the present work. Finally, MgSiN2-Si3N4 composite powders with quasi-spherical morphology were prepared by adding excessive Si3N4 and NH4Cl additive in reactant. The formation and growth mechanism of MgSiN2 grains was reasonably speculated based on the experimental results. Because of the remarkable merits, the as-prepared Si3N4-MgSiN2 composite powders showed great potential for alternative sintering aid in the sintering of Si3N4-based ceramics.

Combustion Synthesis of Α-Si3n4 with the Addition of NH4Cl

Combustion Synthesis of Si<sub>3</sub>N<sub>4</sub> from Si/NH<sub>4</sub>Cl at Low Nitrogen Pressure

Combustion Synthesis of Si<sub>3</sub>N<sub>4</sub> from Si/NH<sub>4</sub>Cl at Low Nitrogen Pressure

Structural Formation and Mechanism in Combustion Synthesis of Nitrogen Ceramics (AIN, Si<sub>3</sub>N<sub>4</sub> and AIN-SiC)

Combustion synthesis of α-Si3N4 powders using in-situ nano-SiO2 coated Si and Si3N4 reactants

Combustion Synthesis of MgSiN2 Powders and Si3N4‐MgSiN2 Composite Powders: Effects of Processing Parameters

Combustion Synthesis of Α-Si3n4 with Green Additives

Combustion Synthesis Of Beta-Si3n4 And Beta-Sialon With Elongated Prismatic Micro-Crystals By Adding Srco3 And Nh4f

Effect of Impurities MgO, CaO, Al2O3, AlN and Al on Α/β Ratio in Combustion Synthesis of Α-Si3n4

Combustion synthesis Si3N4 powders by using activation process

Formation of Si3N4 Coating on SiC Substrate by Gas Transporting Self‐propagating High‐temperature Synthesis with the Addition of NH4Cl

Formation of Si 3 N 4 coating on SiC substrate by gas transporting self‐propagating high‐temperature synthesis with the addition of NH 4 Cl

Effects of diazenedicarboxamide additive on the content of α-Si3N4 synthesized by combustion method

Microstructure and Thermo‐Kinetics Analysis in Combustion Synthesis of Si3N4 with High α‐Phase Content

Combustion Synthesis of β-Si<sub>3</sub>N<sub>4</sub> and β-SiAlON with Elongated Prismatic Micro-Crystals by Adding SrCO<sub>3</sub> and NH<sub>4</sub>F

Combustion Synthesis of AlN–SiC Solid Solution Particles

Combustion synthesis of well-dispersed rod-like -Si<sub>3</sub>N<sub>4</sub> crystals by the addition of carbon

On the Progress of Combustion Synthesis of Si<sub>3</sub>N<sub>4</sub> Ceramic: From Laboratory Research to Industrial Production

Effect of Diluents and NH4F Additive on the Combustion Synthesis of Yb Α-Sialon

Effect of the Diluent on Combustion Synthesis of Silicon Nitride

On the Progress of Combustion Synthesis of Si3n4 Ceramic: from Laboratory Research to Industrial Production

Combustion Synthesis of Α-Si3n4 with the Addition of NH4Cl

Combustion Synthesis of Si<sub>3</sub>N<sub>4</sub> from Si/NH<sub>4</sub>Cl at Low Nitrogen Pressure

Combustion Synthesis of Si&lt;sub&gt;3&lt;/sub&gt;N&lt;sub&gt;4&lt;/sub&gt; from Si/NH&lt;sub&gt;4&lt;/sub&gt;Cl at Low Nitrogen Pressure

Structural Formation and Mechanism in Combustion Synthesis of Nitrogen Ceramics (AIN, Si<sub>3</sub>N<sub>4</sub> and AIN-SiC)

Combustion synthesis of α-Si3N4 powders using in-situ nano-SiO2 coated Si and Si3N4 reactants

Combustion Synthesis of MgSiN2 Powders and Si3N4‐MgSiN2 Composite Powders: Effects of Processing Parameters

Combustion Synthesis of Α-Si3n4 with Green Additives

Combustion Synthesis Of Beta-Si3n4 And Beta-Sialon With Elongated Prismatic Micro-Crystals By Adding Srco3 And Nh4f

Effect of Impurities MgO, CaO, Al2O3, AlN and Al on Α/β Ratio in Combustion Synthesis of Α-Si3n4

Combustion synthesis Si3N4 powders by using activation process

Formation of Si3N4 Coating on SiC Substrate by Gas Transporting Self‐propagating High‐temperature Synthesis with the Addition of NH4Cl

Formation of Si 3 N 4 coating on SiC substrate by gas transporting self‐propagating high‐temperature synthesis with the addition of NH 4 Cl

Effects of diazenedicarboxamide additive on the content of α-Si3N4 synthesized by combustion method

Microstructure and Thermo‐Kinetics Analysis in Combustion Synthesis of Si3N4 with High α‐Phase Content

Combustion Synthesis of β-Si<sub>3</sub>N<sub>4</sub> and β-SiAlON with Elongated Prismatic Micro-Crystals by Adding SrCO<sub>3</sub> and NH<sub>4</sub>F

Combustion Synthesis of AlN–SiC Solid Solution Particles

Combustion synthesis of well-dispersed rod-like -Si<sub>3</sub>N<sub>4</sub> crystals by the addition of carbon

On the Progress of Combustion Synthesis of Si&lt;sub&gt;3&lt;/sub&gt;N&lt;sub&gt;4&lt;/sub&gt; Ceramic: From Laboratory Research to Industrial Production

Effect of Diluents and NH4F Additive on the Combustion Synthesis of Yb Α-Sialon

Effect of the Diluent on Combustion Synthesis of Silicon Nitride

On the Progress of Combustion Synthesis of Si3n4 Ceramic: from Laboratory Research to Industrial Production

Combustion Synthesis of Si<sub>3</sub>N<sub>4</sub> from Si/NH<sub>4</sub>Cl at Low Nitrogen Pressure

On the Progress of Combustion Synthesis of Si<sub>3</sub>N<sub>4</sub> Ceramic: From Laboratory Research to Industrial Production