Abstract:. TaN thin film is an attractive interlayer as well as a diffusion barrier layer in [FeN/TaN] n multilayers for the application as potential write-head materials in high-density magnetic recording. We synthesized two series of TaN films on glass and Si substrates by using reactive radio-frequency sputtering under 5-mtorr Ar/N 2 processing pressure with varied N 2 partial pressure, and carried out systematic characterization analyses of the films. We observed clear changes of phases in the films from metallic bcc Ta to a mixture of bcc Ta(N) and hexagonal Ta 2 N, then sequentially to fcc TaN and a mixture of TaN with N-rich phases when the N 2 partial pressure increased from 0.0% to 30%. The changes were associated with changes in the grain shapes as well as in the preferred crystalline orientation of the films from bcc Ta [100] to [110], then to random and finally to fcc TaN [111], correspondingly. They were also associated with a change in film resistivity from metallic to semiconductor-like behavior in the range of 77–295 K. The films showed a typical polycrystalline textured structure with small, crystallized domains and irregular grain shapes. Clear preferred (111) stacks parallel to the substrate surface with embedded amorphous regions were observed in the film. TaN film with [111]-preferred orientation and a resistivity of 6.0 mΩ cm was obtained at 25% N 2 partial pressure, which may be suitable for the interlayer in [FeN/TaN] n multilayers.

Phase Evolution of Tantalum Nitride and Tantalum Carbide Films with PBII Parameters

Chemical state and phase structure of (TaNbTiW)N films prepared by combined magnetron sputtering and PBII

Tantalum Coated NiTi Alloy by PIIID for Biomedical Application

Compositon of Tantalum Nitride Thin Films Grown by Low-Energy Nitrogen Implantation: A Factor Analysis Study of the Ta 4f XPS Core Level

Microstructures and Properties of Tantalum Film Grown by DC Magnetron Sputtering

Structural and electrical properties of tantalum nitride thin films fabricated by using reactive radio-frequency magnetron sputtering

Structural Correlation In Tantalum Nitride Formation By Direct Nitrogen Implantation

Biomedical Properties of Tantalum Nitride Films Synthesized by Reactive Magnetron Sputtering

Microstructures and Properties of N-Doped TiO_2 Films Grown by Dielectric Barrier Discharge Chemical Vapor Deposition

Structure Evolution and Mechanical Properties of Ta–Nb–Ti–W–N Multielement Films

Tantalum Nitride Thin Film with a Nearly Zero Temperature Coefficient of Resistance Synthesized by Magnetron Co-Sputtering

Surface modification of TiNi alloy through tantalum immersion ion implantation

Tribological Properties of Ti-Al-N Films Prepared by Plasma-Based Ion Implantation Mixing

Microstructure and Thermal Diffusivity Investigations of RF-Sputtered Tantalum Nitride Films

Composition and structure of Ti-6Al-4V alloy plasma-based ion implanted with nitrogen

Characteristics of TiN films deposited on a trench-shaped sample prepared by plasma-based ion implantation and deposition

Two-Phase Nanostructured Carbon Nitride Films Prepared by Direct Current Magnetron Sputtering and Thermal Annealing

XPS Study on Chemical State and Phase Structure of PBII Nitriding M50 Steel

Phases and Structures of Nanocrystalline Tin Films

Ta-based Barrier Layer Improved by Plasma Immersion Ion Implantation

Preparation and Characterization of Tantalum-Doped Indium Tin Oxide Films Deposited by Magnetron Sputtering