Abstract:This study explores the use of direct internal reforming solid oxide fuel cells (DIR‐SOFCs) for co‐generating electricity and chemicals from methane. It examines how different fuel compositions affect performance, reveals how carbon deposition impacts anode structures through advanced imaging techniques, and validates the technology's efficiency and stability at an industrial scale, paving the way for broader adoption in sustainable energy systems. The co‐generation of electricity and chemicals via direct internal reforming solid oxide fuel cells (DIR‐SOFCs) offers a promising route to carbon‐neutral energy solutions. However, challenges such as inadequate performance and fast degradation, particularly when using hydrocarbon fuels like CH4, hinder the deployment of DIR‐SOFC technology. This study addresses three critical issues: the effect of fuel composition on electrochemical properties, the mechanisms and microstructural impacts of carbon deposition, and the practical feasibility of DIR‐SOFCs at an industrial scale. First, comprehensive polarization and impedance analyses are conducted to assess the impact of varying fuel compositions—specifically p(CH4) and p(H2O)—on DIR‐SOFC performance. Second, advanced morphological characterization, machine learning‐assisted 3D reconstructions, and numerical simulations are utilized to reveal carbon deposition behavior and its effects on anode microstructures. Quantitative analysis of carbon's impact on pores, Ni, and YSZ phases provides novel insights into carbon‐induced microstructural changes. Finally, the industrial‐scale co‐generation of electricity and chemicals is validated, emphasizing both energy efficiency and operational stability. This study enhances the understanding of electrochemical and microstructural mechanisms, offering crucial insights for optimizing DIR‐SOFC design and operation, and laying the groundwork for their broader adoption in a carbon‐neutral future.

High-rate Electrochemical Partial Oxidation of Methane in Solid Oxide Fuel Cells

Development of Methanol-Fueled Low-Temperature Solid Oxide Fuel Cells

Direct methanol oxygen-ion conducting solid oxide fuel cell with an integrated in-situ cracking reactor

Direct Operation of Solid Oxide Fuel Cells on Low-Concentration Oxygen-Bearing Coal-Bed Methane with High Stability

Direct liquid methanol-fueled solid oxide fuel cell

Performance Characteristics of a Micro-tubular Solid Oxide Fuel Cell Operated with a Fuel-rich Methane Flame

Autothermal reforming of methane over an integrated solid oxide fuel cell reactor for power and syngas co-generation

Optimization of Methane Reforming for High Efficiency and Stable Operation of SOFC Stacks

Methane Partial Oxidation-assisted H2O/CO2 Co-electrolysis for Syngas Production in Both Electrodes

Experimental Characterization of a Direct Methane Flame Solid Oxide Fuel Cell Power Generation Unit

Controlled Deposition and Utilization of Carbon on Ni-Ysz Anodes of Sofcs Operating on Dry Methane

Performance Evaluation of Solid Oxide Fuel Cell with In-Situ Methane Reforming

Degradation mechanisms and mitigation strategies of direct methane solid oxide fuel cells

Methane Production and Electricity Generation in a Proton Conducting Tubular Reversible Solid Oxide Cell

The Performance of Solid Oxide Fuel Cells Based on Methanol Solution

A Robust Flat-Chip Solid Oxide Fuel Cell Coupled with Catalytic Partial Oxidation of Methane

Thermal Modeling and Management of Solid Oxide Fuel Cells Operating with Internally Reformed Methane

Pressurized Tubular Solid Oxide H2O/CO2 Coelectrolysis Cell for Direct Power‐to‐methane

Co-Generation of Electricity and Chemicals via Solid Oxide Fuel Cells Using Li-Doped LSGM and LSF Composite Anodes

Fabrication and Operation of Flow‐through Tubular SOFCs for Electric Power and Synthesis Gas Cogeneration from Methane

Co‐Generation of Electricity and Chemicals From Methane Using Direct Internal Reforming Solid Oxide Fuel Cells