Abstract:Energy storage is needed for the renewable energy power, and it is highly promising to convert CO2 to fuels utilizing the surplus renewable energy. Solid oxide cell (SOC) is an efficient energy conversation device, and it can realize energy storage by reversible operation. However, the CO2 electrolysis process is limited by the intensive energy input and low efficiency. To improve the electrolysis efficiency and realize syngas production, in this work, nickel-yttria stabilized zirconia (Ni/YSZ) supported solid oxide cell has been used for CH4 assisted CO2 electrolysis (CH4-SOEC). Moreover, a novel energy storage concept by cycling operating the cell in CH4-SOFC mode (discharge) and CH4-SOEC mode (charge) has been proposed, called CH4 assisted solid oxide cell (CH4-SOC). Besides energy storage, the CH4-SOC technology can realize syngas production as well. In the experiments, CH4 is continuously supplied to the Gd-doped ceria (GDC) modified Ni/YSZ anode, while air/CO2 are supplied to the YSZ-La(0.6)5S(0.4)FeO(3-delta) (LSF)/GDC cathode in discharge/charge cycles, respectively. Experiments demonstrate that the cell presents well electrochemical performance and durability for 400 h under different operation modes. Using distribution of relaxation times (DRT) method, the rate limiting steps of the fundamental electrochemical processes in the electrodes have been identified. Moreover, thermodynamic calculations have been performed to evaluate the cell efficiency. Results suggest that the cell could realize an energy conversion efficiency of 84% in case of fuel utilization of 0.9, where the ratio of the discharge electric energy to the charge electric energy is about 0.95. Both experiments and calculations demonstrate the feasibility of technology, and using a conventional SOC is much important for the real application of it.

Methane Production and Electricity Generation in a Proton Conducting Tubular Reversible Solid Oxide Cell

Theoretical Modeling of a Pressurized Tubular Reversible Solid Oxide Cell for Methane Production by Co-Electrolysis

Thermal Management of Reversible Solid Oxide Cells in the Dynamic Mode Switching

Theoretical Modeling of Methane Production in Pressurized Micro Tubular R-SOFC

Syngas/power Cogeneration from Proton Conducting Solid Oxide Fuel Cells Assisted by Dry Methane Reforming: A Thermal-Electrochemical Modelling Study

Thermodynamic and Experimental Assessment of Proton Conducting Solid Oxide Fuel Cells with Internal Methane Steam Reforming

High-rate Electrochemical Partial Oxidation of Methane in Solid Oxide Fuel Cells

High Performance Tubular Solid Oxide Fuel Cells With Bscf Cathode

Experimental Characterization and Theoretical Modeling of Methane Production by H2o/Co2 Co-Electrolysis in A Tubular Solid Oxide Electrolysis Cell

Performance Evaluation of Solid Oxide Fuel Cell with In-Situ Methane Reforming

The Performance of a Single-Chamber Solid Oxide Fuel Cell Operated under Thin Oxygen Condition Within Methane Fuel

Optimization of Methane Reforming for High Efficiency and Stable Operation of SOFC Stacks

Pressurized Tubular Solid Oxide H2O/CO2 Coelectrolysis Cell for Direct Power‐to‐methane

Thermal Modeling and Management of Solid Oxide Fuel Cells Operating with Internally Reformed Methane

Energy Storage and Syngas Production by Switching Cathode Gas in Nickel-Yttria Stabilized Zirconia Supported Solid Oxide Cell

Geometric Synergy of Steam/Carbon Dioxide Co-electrolysis and Methanation in a Tubular Solid Oxide Electrolysis Cell for Direct Power-to-Methane

A Robust Flat-Chip Solid Oxide Fuel Cell Coupled with Catalytic Partial Oxidation of Methane

Direct Operation of Solid Oxide Fuel Cells with Methane Fuel

Direct Operation of Solid Oxide Fuel Cells on Low-Concentration Oxygen-Bearing Coal-Bed Methane with High Stability

Combined Methane Reforming by Carbon Dioxide and Steam in Proton Conducting Solid Oxide Fuel Cells for Syngas/power Co-Generation

Electrochemical Characteristics and Carbon Tolerance of Solid Oxide Fuel Cells with Direct Internal Dry Reforming of Methane