Abstract:In contrast to fossil fuel or nuclear energy based electrical power intermittent renewable energy such as solar and wind need to balance the mismatch of energy supply and demand to allow stable and secure grid operation requiring energy storage technologies. A promising device is the solid oxide electrochemical cell (SOC) which can be operated reversibly, i.e. an SOC can act as an electrolyser to store electricity in the form of hydrogen and it can act as a fuel cell to produce electricity, water and heat. With this technology a single stack can be integrated into one system to address different markets such as hydrogen production, power-to-gas, energy storage and distributed power generation. When electrolyzing both steam and CO2 in co-electrolysis operating mode, synthesis gas can be produced to be converted by further downstream catalytic processes into fuels such as methane, gasoline or diesel. Due to the high operating temperature of 750-900 °C and the possibility to re-use waste heat from industrial processes very high electrical efficiency can be achieved. However, maintaining the performance during long-term operation represents still a major challenge. Solid oxide cells and stacks are characterized and tested at DLR regarding electrochemical performance and degradation for both reversible and co-electrolysis operation. In cooperation with a car manufacturer (AUDI AG, Germany) and a stack supplier (Sunfire GmbH, Germany) DLR works on the investigation of SOC stacks during near-system operating conditions in electrolysis as well as reversible operating mode. The electrochemical performance is monitored during long-term tests to be compared with identical stacks implemented in an industrial reversible SOC (RSOC) system in order to determine and better understand degradation processes occurring in different operating modes. The concept of the power-to-gas facility with 300 kW power and first results of stack tests are presented. DLR also works on the evaluation of solid oxide cells for co-electrolysis of CO2 and H2O aiming at the production of synthetic fuels. Cell behaviour and durability are assessed under various operating conditions. Results will be reported and discussed and remaining challenges for maturing the technology are addressed.

Energy Storage and Syngas Production by Switching Cathode Gas in Nickel-Yttria Stabilized Zirconia Supported Solid Oxide Cell

Dynamic Simulation of a Reversible Solid Oxide Cell System for Efficient H2 Production and Power Generation

Thermal Management of Reversible Solid Oxide Cells in the Dynamic Mode Switching

Simultaneous Electrochemical Reduction of Carbon Dioxide and Partial Oxidation of Methane in a Solid Oxide Cell with Silver-Based Cathode and Nickel-Based Anode

High performance and stability of nanocomposite oxygen electrode for solid oxide cells

Reversible Solid Oxide Cell and Co-Electrolysis Operation for Power-to-Gas and Energy Storage Application

Syngas production through CH4-assisted co-electrolysis of H2O and CO2 in La0.8Sr0.2Cr0.5Fe0.5O3-δ-Zr0.84Y0.16O2-δ electrode-supported solid oxide electrolysis cells

Solid Oxide Cells with Phase-Inversion Tape-Casted Hydrogen Electrode and SrSc0.175Nb0.025Co0.8O3-δ Oxygen Electrode for High-Performance Reversible Power Generation and Hydrogen Production

Solid Oxide Cells with Phase-Inversion Tape-Casted Hydrogen Electrode and SrSc<sub>0.175</sub>Nb<sub>0.025</sub>Co<sub>0.8</sub>O<sub>3</sub><sub> -</sub> Oxygen Electrode for High-Performance Reversible Power Generation and Hydrogen Production

CO 2 utilization by reversible solid oxide cells towards carbon neutralization for long-term energy storage

Controlled Deposition and Utilization of Carbon on Ni-Ysz Anodes of Sofcs Operating on Dry Methane

Study on the 4-channel micro-monolithic design with geometry control for reversible solid oxide cell

Conversion of CO 2 through solid oxide co-electrolysis cell with cobalt-free fuel electrode

A Highly-Performed, Dual-Layered Cathode Supported Solid Oxide Electrolysis Cell for Efficient CO2Electrolysis Fabricated by Phase Inversion Co-Tape Casting Method

Performance Evaluation of Solid Oxide Fuel Cell with In-Situ Methane Reforming

Stability of Ni-YSZ Anode for SOFCs in Methane Fuel: the Effects of Infiltrating La0.8Sr0.2FeO3-δand Gd-Doped CeO2Materials

Co-Generation of Electricity and Syngas on Proton-Conducting Solid Oxide Fuel Cell with A Perovskite Layer As A Precursor of A Highly Efficient Reforming Catalyst

Solid Oxide Fuel Cells Fueled by Simulated Biogas: Comparison of Anode Modification by Infiltration and Reforming Catalytic Layer

Electrical Energy Storage Using Hydrogen Storage Alloy Coupled Proton-Conducting Reversible Solid Oxide Cell

Developing Solid Oxide Cells for Sustainable Generation of Chemicals

Co‐Generation of Electricity and Chemicals From Methane Using Direct Internal Reforming Solid Oxide Fuel Cells