Abstract:Reversible solid oxide cell technology is of increasing interest and is emerging as a promising grid-flexible support system [1] with storage [2]. Among the types of cell architecture available, electrolyte-supported cells have proven to be better in terms of long-term stability and degradation of the cell, albeit sacrificing on performance as compared to anode-supported cells [3]. This makes electrolyte-supported cells better suited architecture to be used in reversible systems where higher stability is required due to the changing operating conditions in each mode. In the present work, validated cell and stack models of Nexceris electrolyte-supported cells are used to model a full-scale reversible solid oxide system designed for hydrogen production. EIS data from symmetric button cells and polarization curves from 5cm×5cm full cells are used to validate the stack model. A net 100 kW e system in fuel cell mode is modelled with electrolyte-supported stacks from Nexceris operating at a nominal temperature of 800 o C. The system is run at thermoneutral conditions in electrolysis mode and at 0.5 A/cm 2 in fuel cell mode to balance between efficiency and hydrogen production. The levelized cost of hydrogen production is calculated using a price-taker model with the system pumping the produced hydrogen into a natural gas/hydrogen pipeline. The effect of various parameters, such as the capacity factor of the system, the operating pressure, grid-electricity pricing, etc. - are investigated on the levelized cost of hydrogen. [1] Guenther Glenk and Stefan Reichelstein, “Reversible Power-to-Gas systems for energy conversion and storage”, Nature Communications 13 , 2010 (2022). [2] Evan Reznicek and Robert J. Braun, “Techno-economic and off-design analysis of stand-alone, distributed-scale reversible solid oxide cell energy storage systems”, Energy Conversion and Management 175 , 2018. [3] Marco A. Buccheri, Anand Singh, and Josephine M. Hill, “Anode- versus electrolyte-supported Ni-YSZ/YSZ/Pt SOFCs: Effect of cell design on OCV, performance and carbon formation for the direct utilization of dry methane”, Journal of Power Sources 196 , 2011. Figure 1

Electrical Energy Storage Using Hydrogen Storage Alloy Coupled Proton-Conducting Reversible Solid Oxide Cell

Dynamic Simulation of a Reversible Solid Oxide Cell System for Efficient H2 Production and Power Generation

Thermal Management of Reversible Solid Oxide Cells in the Dynamic Mode Switching

Solid Oxide Cells with Phase-Inversion Tape-Casted Hydrogen Electrode and SrSc0.175Nb0.025Co0.8O3-δ Oxygen Electrode for High-Performance Reversible Power Generation and Hydrogen Production

Solid Oxide Cells with Phase-Inversion Tape-Casted Hydrogen Electrode and SrSc<sub>0.175</sub>Nb<sub>0.025</sub>Co<sub>0.8</sub>O<sub>3</sub><sub> -</sub> Oxygen Electrode for High-Performance Reversible Power Generation and Hydrogen Production

Improving the Performance and Economics of Reversible Solid Oxide Cell-Based Hydrogen Energy Storage Systems Through the Utilization of Renewable Alternative Fuels

Energy Storage and Hydrogen Production by Proton Conducting Solid Oxide Electrolysis Cells with a Novel Heterogeneous Design

Development of Reversible Ni-Fe Metal Supported Solid Oxide Cells

High-performance Oxygen Electrode for Reversible Solid Oxide Cells with Power Generation and Hydrogen Production at Intermediate Temperature

Synthesis And Characterization Of A Sr0.95y0.05tio3-Delta-Based Hydrogen Electrode For Reversible Solid Oxide Cells

Energy Storage and Syngas Production by Switching Cathode Gas in Nickel-Yttria Stabilized Zirconia Supported Solid Oxide Cell

AN ELECTRICAL ENERGY STORAGE SYSTEM BASED ON SOLID OXIDE FUEL CELLS

High performance and stability of nanocomposite oxygen electrode for solid oxide cells

High strength bilayer finger-like ceramic supported reversible solid oxide cells via phase inversion tape-casting technology

CO 2 utilization by reversible solid oxide cells towards carbon neutralization for long-term energy storage

Numerical investigation of the transient performance of a reversible solid oxide cell during the mode switching process

Performance of Reversible Solid Oxide Cells Based on La0.6Ca0.4Fe0.7Sc0.1Ni0.2O3– Oxygen Electrode

Reversible Solid Oxide Cell with Proton Conducting Electrolyte:Materials and Reaction Machanism

Scenarios for Hydrogen Production from a Full-Scale Reversible Solid Oxide System with Electrolyte-Supported Stacks

A Synergistic Three-Phase, Triple-Conducting Air Electrode for Reversible Proton-Conducting Solid Oxide Cells

An efficient and prospective self-assembled hybrid electrocatalyst for symmetrical and reversible solid oxide cells