Abstract:Solid oxide electrochemical cell (SOC) is a highly promising alternative for fuel conversion and power-to-gas due to its high efficiency and low emission. However, degradation resulting from the electrolyte-electrode interface is a major challenge in both fuel cell mode and electrolysis mode. Here, a co-sintering tri-layer structure cell with nano composite oxygen electrode is developed to mitigate the interface issue. A 10 x 10 cm(2) NiO/YSZ lYSZ lYSZ-La0.6Sr0.4Co0.2Fe0.8O3-25 (LSCF) cell has been conducted under different fuels in SOFC mode. A power density output of 558 mW/cm(2) @0.7 V-800 degrees C in wet H-2 and a durability of 300 h in simulated syngas have been obtained. The performance of LSF, LSCF and SSC oxygen electrodes have been studied in both SOFC and SOEC modes. It suggests that three oxygen electrodes have an order of SSC > LSCF > LSF in electrochemical performance, and an opposite order in stability of SOEC. The degradation of the LSCF and SSC can be derived from the solid-state reactions at the interface between Co-containing perovskites and YSZ during operation. It demonstrates that GDC and Ag modification can enhance the oxygen elettro destability by impeding the soli state reactions and the nanoparticles sintering. Results suggest that GDC has a negative effect on the cell performance and Ag has a positive effect, implying that enhancing the electric conductivity of YSZ-LSCF is the key to improve the cell performance. Moreover, cell with YSZ-SFM/GDC has been applied in CH4 assisted SOEC process (CH4-SOEC), in which a significant reduction of electricity consume can be realized. (C) 2019 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

High strength bilayer finger-like ceramic supported reversible solid oxide cells via phase inversion tape-casting technology

A High-Strength Solid Oxide Fuel Cell Supported by an Ordered Porous Cathode Membrane

High Performance Yttria-Stabilized Zirconia Based Intermediate Temperature Solid Oxide Fuel Cells with Double Nano Layer Composite Cathode

Solid Oxide Cells with Phase-Inversion Tape-Casted Hydrogen Electrode and SrSc0.175Nb0.025Co0.8O3-δ Oxygen Electrode for High-Performance Reversible Power Generation and Hydrogen Production

Reversible fuel electrode supported solid oxide cells fabricated by aqueous multilayered tape casting

Solid Oxide Cells with Phase-Inversion Tape-Casted Hydrogen Electrode and SrSc<sub>0.175</sub>Nb<sub>0.025</sub>Co<sub>0.8</sub>O<sub>3</sub><sub> -</sub> Oxygen Electrode for High-Performance Reversible Power Generation and Hydrogen Production

Development of Reversible Ni-Fe Metal Supported Solid Oxide Cells

Phase Inversion Tape Casting and Electrochemical Performance of Solid Oxide Fuel Cell Anode

Preparation of Dual-Pore Anode Supported Sc2o3-Stabilized-Zro2 Electrolyte Planar Solid Oxide Fuel Cell by Phase-Inversion and Dip-Coating

An efficient and prospective self-assembled hybrid electrocatalyst for symmetrical and reversible solid oxide cells

Functionally Graded Infiltration Triggering Ultrahigh Electrolytic Current in Robust Reversible Solid Oxide Cells

Study on the 4-channel micro-monolithic design with geometry control for reversible solid oxide cell

High performance and stability of nanocomposite oxygen electrode for solid oxide cells

Electrochemical Property of Multi-Layer Anode Supported Solid Oxide Fuel Cell Fabricated Through Sequential Tape-Casting and Co-Firing

Preparation and Performance of Tri-layer Composite Anode Supported Fuel Cell

A Symmetrical Solid Oxide Fuel Cell Prepared by Dry-Pressing and Impregnating Methods

Metal-supported Solid Oxide Fuel Cells with In-Situ Sintered (bi2o3)0.7(er2o3)0.3–ag Composite Cathode

An Anode-Supported Micro-Tubular Solid Oxide Fuel Cell with Redox Stable Composite Cathode

Optimization of Anode Structure for Intermediate Temperature Solid Oxide Fuel Cell Via Phase-Inversion Cotape Casting

Metal-Supported Solid Oxide Fuel Cells with a Simple Structure

Micro-Tubular Solid Oxide Fuel Cells with Graded Anodes Fabricated with A Phase Inversion Method