Abstract:Solid oxide electrolysis cells (SOECs) enable the integration of H2O/CO2 co-electrolysis and methanation reactions in a single reactor. The product gas may therefore potentially be sent directly to the existing natural gas pipelines. However, current power-to-methane (P2M) routes are not able to achieve acceptable CO2-to-CH4 conversion in a single SOEC reactor for direct integration into natural gas networks. In order to obtain higher CO2-to-CH4 conversions, a two-dimensional multiscale electro-thermo tubular SOEC model was developed to describe in detail the P2M processes along the whole cell and optimize the materials, flow modes, and operating conditions for CH4 production. The numerical simulations revealed that the stabilized Zr-based SOEC is unable to offer a sufficiently high electrochemical performance at methanation-favoring temperatures (250-650 degrees C). Such a temperature mismatch limits the peak CH4 production ratio in the tubular-stabilized Zr-based SOEC (with an inlet CO2 content of 20%) to only 13% at 1.5 V. In contrast, a tubular strontium and magnesium doped lanthanum gallate (LSGM)-based SOEC showed remarkable performance at or below 650 degrees C, improving the CH4 production ratio to over 50% at 550 degrees C and 1.3 V for the same inlet gas composition. However, the operating temperature was still too high to obtain an acceptable CO2-to-CH4 conversion for direct supply to natural gas pipelines. The model revealed that the H2O/CO2 co-electrolysis and methanation reactions can be synchronously enhanced by feeding a cold gas in counter-flow mode under pressurized conditions. At 29 bar, the tubular LSGM-based SOEC could achieve a CO2-to-CH4 conversion ratio of 98.7%, with an electricity-to-gas efficiency of 94.5% in the thermal neutral mode. The produced gas can be directly sent to the existing natural gas pipelines so that the curtailed renewable power can be stored more efficiently and utilized over a wider area.

Theoretical Modeling of a Pressurized Tubular Reversible Solid Oxide Cell for Methane Production by Co-Electrolysis

Theoretical Modeling of Methane Production in Pressurized Micro Tubular R-SOFC

Methane Production and Electricity Generation in a Proton Conducting Tubular Reversible Solid Oxide Cell

Multi-objective Optimizations of Solid Oxide Co-Electrolysis with Intermittent Renewable Power Supply Via Multi-Physics Simulation and Deep Learning Strategy

Experimental Characterization and Theoretical Modeling of Methane Production by H2o/Co2 Co-Electrolysis in A Tubular Solid Oxide Electrolysis Cell

Modelling of SOEC-FT Reactor: Pressure Effects on Methanation Process

Pressurized Tubular Solid Oxide H2O/CO2 Coelectrolysis Cell for Direct Power‐to‐methane

Syngas/power Cogeneration from Proton Conducting Solid Oxide Fuel Cells Assisted by Dry Methane Reforming: A Thermal-Electrochemical Modelling Study

Thermal Modeling and Management of Solid Oxide Fuel Cells Operating with Internally Reformed Methane

Geometric Synergy of Steam/Carbon Dioxide Co-electrolysis and Methanation in a Tubular Solid Oxide Electrolysis Cell for Direct Power-to-Methane

Modelling Of One-Step Methanation Process Combining Soecs And Fischer-Tropsch-Like Reactor

Synchronous Enhancement of H2O/CO2 Co-Electrolysis and Methanation for Efficient One-Step Power-to-methane

Glycerol-assisted co-electrolysis in solid oxide electrolyzer cell (SOEC) for green syngas production: A 2D modelling study

Comprehensive Modeling of Tubular Solid Oxide Electrolysis Cell for Co-Electrolysis of Steam and Carbon Dioxide

Modeling of Direct Carbon-Assisted Solid Oxide Electrolysis Cell (SOEC) for Syngas Production at Two Different Electrodes

2D thermal modeling of a solid oxide electrolyzer cell (SOEC) for syngas production by H2O/CO2 co-electrolysis

High-rate Electrochemical Partial Oxidation of Methane in Solid Oxide Fuel Cells

Co-Oxidation Modeling for a Syngas-Supplied Microtubular Solid Oxide Fuel Cell

Methane Synthesis Characteristics of H2O/CO2 Co-Electrolysis in Tubular Solid Oxide Electrolysis Cells

Methane Partial Oxidation-assisted H2O/CO2 Co-electrolysis for Syngas Production in Both Electrodes

The Performance of a Single-Chamber Solid Oxide Fuel Cell Operated under Thin Oxygen Condition Within Methane Fuel