Abstract:Cubic boron nitride (cBN) with high hardness, thermal conductivity, wear resistance, and chemical inertness has become the most promising abrasive and machining material. Due to the difficulty of fabricating pure cBN body, generally, some binders are incorporated among cBN particles to prepare polycrystalline cubic boron nitride (PcBN). Hence, the binders play a critical factor to the performances of PcBN composites. In this study, the PcBN composites with three binder systems containing ceramic and metal phases were fabricated by spark plasma sintering (SPS) from 1400 to 1700 °C. The sintering behaviors and mechanical properties of the composites were investigated. Results show that the effect of binder formulas on mechanical properties mainly related to the compactness, mechanical performances, and thermal expansion coefficient of binder phases, which affect the carrying capacity of the composites and the bonding strength between binder phases and cBN particles. The PcBN composite with SiAlON phase as binder presented optimal flexural strength (465±29 MPa) and fracture toughness (5.62±0.37 MPa·m 1/2 ), attributing to the synergistic effect similar to transgranular and intergranular fractures. Meanwhile, the excellent mechanical properties can be maintained a comparable level when the temperature even rises to 800 °C. Due to the weak bonding strength and high porosity, the PcBN composites with Al 2 O 3 -ZrO 2 (3Y) and Al-Ti binder systems exhibited inferior mechanical properties. The possible mechanisms to explain these results were also analyzed.

Spark plasma sintering of cBN/β-SiAlON composites

High pressure sintering behavior and mechanical properties of cBN-Ti 3Al and cBN-Ti 3Al-Al composite materials

High-pressure synthesis of Al<sub>2</sub>O<sub>3</sub>-cBN composites: Effect of thermodynamic condition and cBN volume fraction on their microstructure and properties

Enhanced thermal shock resistance of BN-based composites sintered by hot-pressing with the introduction of nano oxides

Analysis of Mechanical Properties of Al2O3‐cBN‐hBN Composites and Identification of Main Influencing Factors

In situ synthesis of PcBN composites by Sialon combined with cBN-TiB2-AlN and their properties

Microstructure, mechanical properties and thermal shock behavior of h-BN-SiC ceramic composites prepared by spark plasma sintering

Influence of binder systems on sintering characteristics, microstructures, and mechanical properties of PcBN composites fabricated by SPS

Synthesis and characterization of cBN-Al2O3-Al cutting tool material by dual power spark plasma sintering

Influence of Length-Scale on Stabilization of Boron Carbide in Al-based Metal Matrix Composites During Plasma Activated Sintering

Spark Plasma Sintering Of Boron Nitride-Aluminum Nitride Composites

Fabrication and properties of AL2O3-SiAlON composites with nano-sized t- and h-BN dispersion

Synthesis of α-SiC/α-SiAlON composites by spark plasma sintering: Phase formation and microstructures development

Influence of Silicon Addition on the Sintering Behavior and Mechanical Properties of Boron Carbide by SPS Process

Fabrication and Properties of SiO2-BN-Si3N4 Composites

Densification and mechanical properties of boron carbide prepared via spark plasma sintering with cubic boron nitride as an additive

A Novel In Situ Synthesis Of Sibcn-Zr Composites Prepared By A Sol-Gel Process And Spark Plasma Sintering

Spark plasma sintering and mechanical properties of Al_2O_3-ZrO_2 nanocomposites

Fabrication and thermal conductivity of AlN/BN ceramics by spark plasma sintering

Effects of TiAl Alloy as a Binder on Cubic Boron Nitride Composites