Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. In this study, the alumina-based tungsten carbide (WC-Al2O3) composites reinforced by different weight percentages of carbon nanotubes were successfully prepared by the advanced spark plasma sintering technique. This study has the novelty that such composites with the given compositions were never sintered before using spark plasma sintering. The WC-Al2O3-CNTs composites were fabricated to design advanced tool materials with an optimum set of mechanical and thermal properties for high-temperature cutting applications. The experimental results revealed considerable growth in micro-hardness and fracture toughness in WC-Al2O3-CNTs composites as compared to WC-Al2O3 composites. The ideal set of mechanical properties was acquired by WC-Al2O3-CNTs-0.5 composite which also exhibited a minimum value of grain size. At higher concentrations of carbon nanotubes, the mechanical properties of composites tend to degrade due to the agglomeration of carbon nanotubes. The study presented better results in sintered composites than the composites fabricated through other sintering techniques. The improved strengthening and toughening results of WC-Al2O3-CNTs composites along with the fine microstructures were mainly acquired by inhibiting grain growth during sintering, improved dispersion of the constituents in the composites (electron probe microscopy analysis/wavelength dispersive spectroscopy mapping) and consolidation at shorter sintering periods in spark plasma sintering. A thermal study was also conducted to discuss the thermal stability of sintered composites at ambient as well as at higher temperatures to estimate the behavior of thermal conductivity and thermal diffusivity of composites at different temperatures.

Experimental investigation on fabrication, characterization and properties of spark plasma sintered alumina-based tungsten carbide composites reinforced by carbon nanotubes

Fabrication and Mechanical Properties of Wc-Co-Al2o3 Nanocomposites by Spark Plasma Sintering

Effect of Spark-Plasma-Sintering Conditions on Tensile Properties of Aluminum Matrix Composites Reinforced with Multiwalled Carbon Nanotubes (MWCNTs)

Optimization of the Spark Plasma Sintering Process for High-Volume Fraction Tungsten Carbide/Al 2025 Composites

Spark Plasma Sintering Preparation of Tungsten Carbide-Reinforced Iron-Based Composite Materials: Wear Resistance Performance and Mechanism

Sintering Behaviors of Carbon NanotubesAluminum Composite Powders

Mechanical and Thermal Properties of Carbon Nanotube/aluminum Composites Consolidated by Spark Plasma Sintering

Processing and Properties of Carbon Nanotubes-Nano-wc-co Composites

Synthesis and Characterization of Titanium Carbide and/or Alumina Nanoparticle Reinforced Copper Matrix Composites by Spark Plasma Sintering

Microstructures and Mechanical Properties of Carbon Nanotubes Reinforced Pure Aluminum Composites Synthesized by Spark Plasma Sintering and Hot Rolling

Mechanical properties and electrical conductivity of tungsten-coated carbon nanotube reinforced aluminum matrix composites

Processing and characterization of an Al2O3/WC/TiC micro- nano-composite ceramic tool material

Fabrication of Ti2AlC/Ti-44Al-6Nb-0.3Y composite by spark plasma sintering

Microstructure and mechanical properties of in-situ nano TiC reinforced Ni-based alloy composites prepared by spark plasma sintering

A Novel Processing Route to Develop Alumina Matrix Nanocompositesreinforced with Multi-Walled Carbon Nanotubes

Mechanical property and cutting performance of CNTs reinforced cBN cutting tools by spark plasma sintering

Microstructural and Mechanical Characterization of Colloidal Processed WC/(W5Vol%Ni) via Spark Plasma Sintering

Rapid and Low Temperature Spark Plasma Sintering Synthesis of Novel Carbon Nanotube Reinforced Titanium Matrix Composites

Effects of Sintering Parameters on the Microstructure and Mechanical Properties of Carbon Nanotubes Reinforced Aluminum Matrix Composites

The Effect of Processing Parameters on the Performance of Spark Plasma Sintered Cbn-Wc-co Composites

Enhancement of Electrical Conductivity of Aluminum-Based Nanocomposite Produced by Spark Plasma Sintering