Abstract:Catalytic chemical vapor deposition (CVD) grown multi-walled carbon nanotubes (MWNTs) are treated with HF and deionized water and are then placed into alumina ceramics for improvement of both electrical conductivity and mechanical properties. In particular, an alternating current (ac) electric field is applied during the coagulation of the alumina slurries to induce the formation of aligned MWNT networks in the alumina matrix. The coagulated alumina matrix composite bases filled with 2 wt. % ac electric field-induced aligned MWNTs, are then sintered by hot pressing. The electrical conductivities of the prepared composites in directions both parallel and perpendicular to the MWNTs alignment, reach values of 6.2×10-2 S m-1 and 6.8×10-9 S m-1, respectively, compared with that of 4.5×10-15 S m-1 for pristine alumina ceramics. The fracture toughness and flexing strengths of the prepared composites in the two directions are 4.66±0.66 MPa m0.5, 390±70 MPa, and 3.65±0.46 MPa m0.5, 191±5 MPa, respectively, compared with 3.78±0.66 MPa m0.5 and 302±50 MPa for pristine alumina, 4.09±0.15 MPa m0.5 and 334±60 MPa for alumina filled with 2 wt. % MWNTs prepared without the effect of an electric field, respectively. The results indicate that the electric field leads to anisotropic behaviour. The properties of the composites along the direction of the MWNTs alignment are much improved with the addition of a small amount of CVD grown MWNTs.

Electrical, Mechanical, and Thermal Properties of Multiwalled Carbon Nanotube Reinforced Alumina Composites

Effect Of Multi-Walled Carbon Nanotube On Mechanical Properties And Electrical Conductivity Of Alumina

Electrical Conductivity and Dielectric Properties of Multiwalled Carbon Nanotube and Alumina Composites

Thermal conductivities of alumina-based multiwall carbon nanotube ceramic composites

Dramatic effect of multiwalled carbon nanotubes on the electrical properties of alumina based ceramic nanocomposites

Microstructure-toughening Relation in Alumina Based Multiwall Carbon Nanotube Ceramic Composites

Preparation of MWNTs/Al2O3 Composites and Their Mechanical and Electrical Properties

Multifunctional Properties Of Alumina Composites Reinforced By A Hybrid Filler

Fabrication of novel alumina composites reinforced by SiC nano-particles and multi-walled carbon nanotubes

Preparation and Properties of Alumina Composites Modified by Electric Field-Induced Alignment of Carbon Nanotubes

Preparation and Microstructure of Multi-Wall Carbon Nanotubes-Toughened Al2O3 Composite

A New Structure for Multi-Walled Carbon Nanotubes Reinforced Alumina Nanocomposite with High Strength and Toughness

Microstructure and Mechanical Properties of ABOw and Nickel-Coated MWCNTs Reinforced 2024al Hybrid Composite Fabricated by Squeeze Casting

The effect of carbon nanotubes microstructures on reinforcing properties of SWNTs/alumina composite

A Novel Processing Route to Develop Alumina Matrix Nanocompositesreinforced with Multi-Walled Carbon Nanotubes

Effect of carbon nanotube hybrid on the microstructure and properties of AlN skeleton-reinforced highly oriented graphite flake composites

Thermal and electrical conduction of AL/CNT composite

Hybrid nanocomposites: A new route towards tougher alumina ceramics

Toughening And Reinforcing Alumina Matrix Composite With Single-Wall Carbon Nanotubes

Fabrication and mechanical properties of Al2O3–TiC ceramic composites synergistically reinforced with multi-walled carbon nanotubes and graphene nanoplates

Fabrication and mechanical properties of multi-walled carbon nanotubes doped AlN ceramics prepared by spark plasma sintering