Abstract:A novel microstructure design of three phase alumina composites reinforced by nanosize SIC particles and multiwalled carbon nanotubes (MWNTs) is proposed Alumina composites reinforced by different MWNTs contents ranging from 5, 7 and 10 vol% along with concurrent reinforcement of low volume fractions of SIC nanoparticles ranging from 1 2 and 3 vol% were fabricated by spark plasma sintering technique based on proposed microstructure design The nanocomposites have shown significant improvements in fracture toughness and bending strength while hardness remains almost stable The enhancement in fracture toughness was observed by change in fracture mode of alumina from intergranular to transgranular due to presence of SiC nanosize particles at the intragranular positions and further improvement has also been observed due to presence of MWNTs at intergranular positions making intertwining network structure around alumina grains in the matrix The overall improvements in mechanical properties were ascribed to the complementary effect of MWNTs and SIC in strengthening and toughening of alumina matrix The three hallmarks of toughening mechanisms in ceramic fiber composites 1 e crack deflection at the MWNTs/matrix Interface crack bridging by MWNTs at the vain boundaries and MWNTs pullout at the fracture surface were observed at the nano scale in the composites

A New Structure for Multi-Walled Carbon Nanotubes Reinforced Alumina Nanocomposite with High Strength and Toughness

Well-Dispersed Carbon Nanotubes for Greatly Enhanced Mechanical Properties of Alumina-Based Composites

Preparation and Microstructure of Multi-Wall Carbon Nanotubes-Toughened Al2O3 Composite

Carbon-nanotube-templated Carbon Nanofibers with Improved Mechanical Performance

Microstructure-toughening Relation in Alumina Based Multiwall Carbon Nanotube Ceramic Composites

Reinforcement of Alumina Matrix with Multi-Walled Carbon Nanotubes

Toughening And Reinforcing Alumina Matrix Composite With Single-Wall Carbon Nanotubes

Nanoplates forced alignment of multi-walled carbon nanotubes in alumina composite with high strength and toughness

The effect of carbon nanotubes microstructures on reinforcing properties of SWNTs/alumina composite

A Novel Processing Route to Develop Alumina Matrix Nanocompositesreinforced with Multi-Walled Carbon Nanotubes

Investigation on the Reinforcement of Multi-Walled Carbon Nanotubes on Alumina Matrix

Preparation and Mechanical Properties of Carbon Nanotubes Reinforced Alumina Ceramic Composite

Fabrication of novel alumina composites reinforced by SiC nano-particles and multi-walled carbon nanotubes

Strengthening efficiency competition between carbon nanotubes (CNTs) and in-situ Al<sub>4</sub>C<sub>3</sub> nanorods in CNTs/Al composites influenced by alumina characteristics

Carbon nanotube toughened aluminium oxide nanocomposite

Microstructure and Mechanical Properties of ABOw and Nickel-Coated MWCNTs Reinforced 2024al Hybrid Composite Fabricated by Squeeze Casting

In-situ Synthesis of CNTs@Al2O3 Wrapped Structure in Aluminum Matrix Composites with Balanced Strength and Toughness

Colloidal Processing of Carbon Nanotube/Alumina Composites

Microstructure evolution and mechanical properties of carbon nanotubes reinforced Al matrix composites

Electrical, Mechanical, and Thermal Properties of Multiwalled Carbon Nanotube Reinforced Alumina Composites

Extraordinary Reinforcing Effect of Carbon Nanotubes in Aluminium Matrix Composites Assisted by In-Situ Alumina Nanoparticles