Abstract:The design of an interfacial structure is particularly important for load transfer in composites. In this paper, different amounts of carbon nanotubes (CNTs) were grafted onto the carbon fiber (CF) surface by adjusting grown temperature using injection chemical vapor deposition (ICVD). The prepared CF preform grafted with CNTs (CNTs-CF) were used to reinforce magnesium alloy by squeeze casting process. The microstructures were analyzed by means of optical microscope (OM) and scanning electron microscope (SEM), and the interlaminar shear strength (ILSS) and tensile strength of the composites were determined by double-notch shear test and tensile test. The results indicated that moderate ILSS was more conducive to improving the tensile properties of carbon fiber reinforced magnesium matrix (Cf/Mg) composites. Compared with Cf/Mg, the tensile strength of composite with CNTs increased by about 80%. For Cf/Mg composites grafted with CNTs, CNTs had the effects of delaying crack propagation and increasing energy consumption by the pull-out and bridging mechanism, which were the main reasons for improving the strength. The analysis of shear fracture surface showed that the crack propagation path can be optimized by adjusting the amounts of grafted CNTs. The presence of CNTs affects the stress distribution and consequently the crack initiation as well as the crack propagation.

The effect of carbon nanotubes microstructures on reinforcing properties of SWNTs/alumina composite

Toughening And Reinforcing Alumina Matrix Composite With Single-Wall Carbon Nanotubes

Carbon-nanotube-templated Carbon Nanofibers with Improved Mechanical Performance

A New Structure for Multi-Walled Carbon Nanotubes Reinforced Alumina Nanocomposite with High Strength and Toughness

Microstructure-toughening Relation in Alumina Based Multiwall Carbon Nanotube Ceramic Composites

Preparation and Microstructure of Multi-Wall Carbon Nanotubes-Toughened Al2O3 Composite

A Novel Processing Route to Develop Alumina Matrix Nanocompositesreinforced with Multi-Walled Carbon Nanotubes

Effect Of Multi-Walled Carbon Nanotube On Mechanical Properties And Electrical Conductivity Of Alumina

Effect of carbon nanotube hybrid on the microstructure and properties of AlN skeleton-reinforced highly oriented graphite flake composites

Preparation of MWNTs/Al2O3 Composites and Their Mechanical and Electrical Properties

Electrical, Mechanical, and Thermal Properties of Multiwalled Carbon Nanotube Reinforced Alumina Composites

Mechanical Effects of Carbon Nanotubes-Graphene Reinforced Aluminium Matrix Composites

Microstructure evolution and mechanical properties of CNT/Al composite joints via friction stir welding

Effect of carbon nanotubes grown temperature on the fracture behavior of carbon fiber reinforced magnesium matrix composites: Interlaminar shear strength and tensile strength

Nanoplates forced alignment of multi-walled carbon nanotubes in alumina composite with high strength and toughness

Fabrication and mechanical properties of Al2O3–TiC ceramic composites synergistically reinforced with multi-walled carbon nanotubes and graphene nanoplates

CNT-induced heterogeneous matrix grain structure in CNTs/Al composites

Fabrication and Tribological Properties of Carbon Nanotubes-Aluminum Composites

Fabrication of novel alumina composites reinforced by SiC nano-particles and multi-walled carbon nanotubes

Effect of carbon nanotubes on microstructure and mechanical properties of TiZrVMnCu–Er high entropy alloy composites

Heterocoagulation System Assisted Adsorption of Carbon Nanotubes on Alumina for Toughening Ceramics