Abstract:Preparation process and microstructure of CF/CNTs reinforcements and mechanical properties of their composites. Chemical vapor deposition (CVD) method was performed to grow carbon nanotubes (CNTs) on oxidized carbon fiber (CF). First, CF was oxidized by a simple and gentle way to increase the number of active groups and the optimal treatment time was determined. Then, effects of catalyst concentration and growth time on morphologies and loading amount of CNTs, the properties of CF/CNTs reinforcements, and the interlayer properties of CF/CNTs composites were explored. When the catalyst concentration and growth time were controlled at a reasonable level, CNTs can be uniformly grown on the CF surface. The interlaminar shear strength (ILSS) was characterized and the fracture surfaces of CF/CNTs composites were observed. The results demonstrated that when the catalyst precursor was kept at 0.05 mol/L and the growth time was controlled at 10 min, CNTs had the best strength effect and the ILSS increased by 30.25% compared to that of composites without CNTs. The fracture surface showed that CNTs can penetrate the matrix at the interface and enhance the interface through mechanical interlocking effect. The CNTs‐induced interphase allows the stress inside the composites to propagate continuously between resin and fibers, thereby heightening the load carrying capacity. Highlights A simple and gentle way was performed to activate CF without strength reduction. The influence mechanism of various parameters was revealed in detail. The mechanism of CNTs enhancing the interface was revealed.

Effect of carbon nanotubes grown temperature on the fracture behavior of carbon fiber reinforced magnesium matrix composites: Interlaminar shear strength and tensile strength

On the role of carbon nanotubes addition in carbon fiber-reinforced magnesium matrix composites

Carbon-nanotube-templated Carbon Nanofibers with Improved Mechanical Performance

Enhancement of thermal–mechanical performances via a selective CNTs configuration in laminated CNTs/AZ31B composite

Mechanical properties and fabrication of carbon nanotubes reinforced AZ91D magnesium matrix nanocomposites

Effect of chemically grafted CNTs onto carbon fiber on the mechanical properties of fiber metal laminates

Study on Mechanical Properties of Carbon Nanotube Reinforced Composites

CNT-induced heterogeneous matrix grain structure in CNTs/Al composites

Study on the Mechanism of CNTs Regulating the Microstructures and Properties of Al–Cu–Mg Alloy

A multi-layer resin film infusion process to control CNTs distribution and alignment for improving CFRP interlaminar fracture toughness

Interfacial modification of carbon fiber by carbon nanotube gas-phase dispersion

The effect of carbon nanotubes wrapping conformation on the interfacial properties of carbon fiber

Effect of Carbon Nanotube Orientation on Mechanical Properties and Thermal Expansion Coefficient of Carbon Nanotube-Reinforced Aluminum Matrix Composites

Effect of carbon nanotubes on microstructure and mechanical properties of TiZrVMnCu–Er high entropy alloy composites

Effect of CNT film interleaves on the flexural properties and strength after impact of CFRP composites

One‐step in‐situ growth of CNTs on oxidized carbon fiber: Effects of catalyst concentration and growth time on mechanical properties of carbon fiber

The Role of Grafting Force and Surface Wettability in Interfacial Enhancement of Carbon Nanotube/carbon Fiber Hierarchical Composites

Fracture Toughness of Carbon Nanotube-Reinforced Metal- and Ceramic-Matrix Composites

Fabrication of Carbon Nanotubes Reinforced AZ91D Composites by Ultrasonic Processing

Microstructure, Interface and Strengthening Mechanism of Ni-CNTs/AZ91 Magnesium Matrix Composites

Inhibiting of interface thermal cracking with the interlayer nanostructure in fiber aluminum hierarchical composite