Abstract:The severe deterioration of the interface is a crucial factor to restrict the performance improvement of composites. In order to understand the effect of interfacial structure on the mechanical properties and failure modes of the composites, the carbon fiber reinforced aluminum matrix (Cf/Al) composites were fabricated by pressure infiltration process at different fabrication temperatures and Ni coating modification. The micro-indentation test is used to determine the mechanical properties of the matrix between fiber bundles to infer the content of the Al4C3. The results indicate that compared with Al alloy, the hardness and modulus of the matrix between the carbon fiber bundles can be significantly increased by 38.5% and 36.5%, while the matrix between Ni-coated fiber bundles remains unchanged. This is due to the Ni coating preventing the carbon fiber against reaction with liquid aluminum during processing the composite, which reduces the generation of brittle carbides. In addition, it was revealed for the first time that the oblique/axial brittle fracture modes of the fibers occurred simultaneously due to severe interfacial reaction, and the brittle failure mechanism was clarified. The presence of Ni coating on the carbon fiber significantly improves the bending strength and interlaminar shear strength (ILSS) of the composite by approximately 81% and 86%, respectively. The Ni coating optimizes the interfacial bonding, so that the interface can absorb more fracture energy under loads. This work can provide a pratical route to prepare and applicate the high-quality continuous fiber reinforced Al matrix composites.

Inhibiting of interface thermal cracking with the interlayer nanostructure in fiber aluminum hierarchical composite

Enhanced Interfacial Properties of High-Modulus Carbon Fiber Composites Via Molecular Assembly on Fiber Surface

Interfacial Strengthening and Self-Monitoring in Carbon Fiber-Reinforced Composites via Carbon Nanotube-Based Damage Sensors

High mechanical strengthened CNTs/Al composite concepts with robust interface and intragranular reinforcement achieved via interfacial thermite reaction

Architectural and component design of CNTs/Al hierarchical composite for enhanced mechanical/thermal properties

The effect of nickel coating on the mechanical properties and failure modes of continuous carbon fiber reinforced aluminum matrix composites

Effect of carbon nanotubes grown temperature on the fracture behavior of carbon fiber reinforced magnesium matrix composites: Interlaminar shear strength and tensile strength

Improvement of interfacial interaction and mechanical properties in aluminum matrix composites reinforced with Cu-coated carbon nanotubes

Enhanced load transfer by designing mechanical interfacial bonding in carbon nanotube reinforced aluminum composites

Remarkable improvement of mechanical properties of layered CNTs/Al composites with Cu decorated on CNTs

Carbon nanotubes/aluminum interface structure and its effects on the strength and electrical conductivity of aluminum

Carbon Nanotubes Grown on Graphite Films as Effective Interface Enhancement for an Aluminum Matrix Laminated Composite in Thermal Management Applications

CNT-induced heterogeneous matrix grain structure in CNTs/Al composites

Effect of interfacial stability on microstructure and properties of carbon fiber reinforced aluminum matrix composites

Characterization of the interfacial micro-zones in C18150Cu/8011Al laminated composites

Synergistic toughening on CFRP via in-depth stitched CNTs

Interfacial Modification and Performance Enhancement of Carbon Matrix/aluminum Composites

Regulating the interfacial reaction between carbon nanotubes and aluminum via copper nano decoration

Interlaminar toughening in structural carbon fiber/epoxy composites interleaved with carbon nanotube veils

Increasing the interlaminar fracture toughness and thermal conductivity of carbon fiber/epoxy composites interleaved with carbon nanotube/polyimide composite films

Enhanced ductility by Mg addition in the CNT/Al-Cu composites via flake powder metallurgy