Abstract:In this paper, a Ni coating was deposited on the surface of the A356 aluminum alloy by high velocity oxygen fuel spraying to improve the performance of the AZ91D magnesium/A356 aluminum bimetal prepared by a compound casting. The effects of the Ni coating as well as its thickness on microstructure and mechanical properties of the AZ91D/A356 bimetal were systematically researched for the first time. Results demonstrated that the Ni coating and its thickness had a significant effect on the interfacial phase compositions and mechanical properties of the AZ91D/A356 bimetal. The 10µm's Ni coating cannot prevent the generation of the Al-Mg intermetallic compounds (IMCs) at the interface zone of the AZ91D/A356 bimetal, while the Ni coating with the thickness of 45 µm and 190 µm can avoid the formation of the Al-Mg IMCs. When the Ni coating was 45 µm, the Ni coating disappeared and transformed into Mg-Mg2Ni eutectic structures+Ni2Mg3Al particles at the interface zone. With a thickness of 190µm's Ni coating, part of the Ni coating remained and the interface layer was composed of the Mg-Mg2Ni eutectic structures+ Ni2Mg3Al particles, Mg2Ni layer, Ni solid solution (SS) layer, Al3Ni2 layer, Al3Ni layer and sporadic Al3Ni+Al-Al3Ni eutectic structures from AZ91D side to A356 side in sequence. The interface layer consisting of the Mg-Ni and Al-Ni IMCs obtained with the Ni coating had an obvious lower hardness than the Al-Mg IMCs. The shear strength of the AZ91D/A356 bimetal with a Ni coating of 45 µm thickness enhanced 41.4% in comparison with that of the bimetal without Ni coating, and the fracture of the bimetal with 45µm's Ni coating occurred between the Mg matrix and the interface layer with a mixture of brittle fracture and ductile fracture.

The effect of nickel coating on the mechanical properties and failure modes of continuous carbon fiber reinforced aluminum matrix composites

Effect of surface modification on interfacial microstructures and mechanical properties of continuous CF/Al composites

Effect of Cu/Ni coating on the interface and mechanical properties of C f /2024Al composites

Effect of interfacial stability on microstructure and properties of carbon fiber reinforced aluminum matrix composites

Microstructure and Mechanical Properties of ABOw and Nickel-Coated MWCNTs Reinforced 2024al Hybrid Composite Fabricated by Squeeze Casting

Improvement of interfacial interaction and mechanical properties in aluminum matrix composites reinforced with Cu-coated carbon nanotubes

Effect of Al2O3 coating thickness on microstructural characterization and mechanical properties of continuous carbon fiber reinforced aluminum matrix composites

Preparation of Al2O3 coating on Nb fiber and the effect on interfacial microstructure of Nbf/TiAl composite

Effect of copper coating on interfacial properties, interfacial thermal resistance, microstructure evolution and mechanical properties of aluminum matrix composites

Inhibiting of interface thermal cracking with the interlayer nanostructure in fiber aluminum hierarchical composite

Effect of Cu coating thickness on carbon fiber surface on microstructure and mechanical properties of carbon fiber reinforced aluminum matrix composites

Effects of Ni Foil Thickness on the Microstructure and Tensile Properties of Reaction Synthesized Multilayer Composites

Improved wettability and mechanical properties of metal coated carbon fiber-reinforced aluminum matrix composites by squeeze melt infiltration technique

Microstructure, Mechanical and Wear Properties of Short Carbon Fiber-Reinforced AM50 Magnesium Matrix Composite

Orientation control of carbon fibers and enhanced thermal/mechanical properties of hot-extruded carbon fibers/aluminum composites

The Effect of Coating Grain Size on the Selective Oxidation Behaviour of Ni-Cr-Al Alloy

Investigation of interfacial thermal stabilities of Nbf/TiAl composites with and without Al2O3 coating in interface

Preparation of Ni-Cnt Composite Coatings on Aluminum Substrate and Its Friction and Wear Behavior

Improving mechanical properties of AZ91D magnesium/A356 aluminum bimetal prepared by compound casting via a high velocity oxygen fuel sprayed Ni coating

Interfacial Reactions and Mechanical Properties Studies of C-Coated and C/B4C Duplex-Coated SiC Fiber-Reinforced Ti2AlNb Composites

Effects of interfacial diffusion induced infiltration process on the microstructure evolution and interfacial enhancement of CF/Mg composites