A multi-layer resin film infusion process to control CNTs distribution and alignment for improving CFRP interlaminar fracture toughness

Yonglyu He,Jianwei Zhang,Liaojun Yao,Jun Tang,Bixuan Che,Su Ju,Dazhi Jiang
DOI: https://doi.org/10.1016/j.compstruct.2020.113510
IF: 6.3
2021-03-01
Composite Structures
Abstract:<p>The excellent mechanical properties of carbon nanotubes (CNTs) have not been fully demonstrated in toughening laminated composites. One important reason is that the distribution and orientation of the CNTs in composites processing are not well controlled. In this study, 2D fluid–structure interaction simulation was conducted to explore the feasibility of controlling the alignment and distribution of CNTs by using guided resin flow. A multi-layer resin film infusion (MLRFI) process was developed to achieve controlled CNTs distribution and orientation in the composites. The composite laminates with 0.1 wt.% MWCNTs prepared by the MLRFI method demonstrated a 53.6% improvement in initial crack propagation G<sub>IC</sub>, and 78.9% increase in G<sub>IC</sub> at the steady state, compared to the baseline composite. Based on the microscopic examinations on fracture surface and the determination of crack propagation R-curve using the Foote's theory, the significant improvement in the fracture toughness was attributed to the toughening effects of CNTs. Particularly, the addition of CNTs can toughen the epoxy and promote more fibre bridging during crack propagation.</p>
mechanics,materials science, composites
What problem does this paper attempt to address?
The problem this paper attempts to address is the distribution and orientation control of carbon nanotubes (CNTs) in enhancing the interlaminar fracture toughness of composite materials. Despite the excellent mechanical properties of carbon nanotubes, their potential in toughening laminated composites has not been fully demonstrated. One significant reason is the poor control over the distribution and orientation of carbon nanotubes during the composite material processing. Therefore, researchers have developed a Multilayer Resin Film Infusion (MLRFI) process aimed at controlling the distribution and orientation of carbon nanotubes by guiding resin flow, thereby improving the interlaminar fracture toughness of carbon fiber reinforced plastics (CFRP). Specifically, the researchers explored the feasibility of controlling the distribution and orientation of carbon nanotubes by guiding resin flow through 2D fluid-structure interaction simulations and validated the effectiveness of this method through experiments. The results showed that the composite laminates prepared using the MLRFI method containing 0.1 wt.% multi-walled carbon nanotubes (MWCNTs) exhibited a 53.6% increase in the initial crack propagation energy release rate (GIC) and a 78.9% increase in the steady-state GIC. These improvements are mainly attributed to the toughening effect of carbon nanotubes on the epoxy resin and the promotion of more fiber bridging effects during crack propagation.