Abstract:Combining exceptional crushing strength of hollow glass microspheres (HGM) with reinforcing properties of carbon nanotubes as well as carbon fibres with epoxy resins results in a design poised to meet the demand for advanced, lightweight and high strength materials required in a variety of industries, such as aerospace and automotive, particularly, in the manufacture of composite rocket motor casings. In this study, unidirectional laminates of HGM/multi-walled CNTs (MWCNTs)/carbon-epoxy (CE) composites (samples nomenclature A–F) of varying wt.% of HGM and constant 0.1 wt.% of MWCNTs by filament winding technique were fabricated and subsequently cured. The HGM (iM16K) was varied as 0.2, 0.4, 0.6, 0.8, 1.0 wt.% by maintaining a constant concentration of 0.1 wt.% of MWCNTs. The hardener, fine hard (FH5200) was utilized in combination with epoxy resin (Epofine 1555). The epoxy resin was heated to 60°C after the fillers were added. Thermogravimetric analysis, differential mechanical analyzer and thermal mechanical analyzer were used to estimate the thermal stability, glass transition temperature and coefficient of thermal expansion (CTE), respectively. HGM and MWCNTs dispersion in the fracture samples caused by transverse tensile loading was examined using scanning electron microscopy. The effect of variation of HGM and 0.1 wt.% constant MWCNTs on tensile and compressive properties in transverse fibre directions of these composites has been investigated. Transverse tensile strength and tensile modulus were improved by 29.07 and 12.33%, respectively, up on the addition of 0.2 wt.% of HGM and 0.1 wt.% of MWCNTs in CE composite. The other findings indicated that > 0.2 wt.% HGM along with constant concentration of MWCNTs had decreasing effect on transverse tensile strength, modulus and compressive strength. The MWCNTs agglomeration was identified as the cause of these mechanical property degradations. The addition of HGM and MWCNTs decreased the CTE of the composite and increased the glass transition temperature as HGM limits the thermal motions of the epoxy polymer chain's molecular segments. The HGM/MWCNTs/CE composite was shown to be thermally stable up to 310°C.

Reducing Dispersity of Mechanical Properties of Carbon Fiber/epoxy Composites by Introducing Multi-Walled Carbon Nanotubes

Effect of Polymer-Grafted Carbon Nanofibers and Nanotubes on the Interlaminar Shear Strength and Flexural Strength of Carbon Fiber/epoxy Multiscale Composites

Enhanced Interfacial Properties of High-Modulus Carbon Fiber Composites Via Molecular Assembly on Fiber Surface

Interfacial Strengthening and Self-Monitoring in Carbon Fiber-Reinforced Composites via Carbon Nanotube-Based Damage Sensors

Carbon-nanotube-templated Carbon Nanofibers with Improved Mechanical Performance

Mechanical properties of a carbon fiber reinforced epoxy resin composite improved by integrating multi-walled carbon nanotubes and graphene nanoplatelets

Influence of a Liquid-Like MWCNT Reinforcement on Interfacial and Mechanical Properties of Carbon Fiber Filament Winding Composites

Effect of NH2-MWCNTs sprayed carbon fiber on the mechanical properties of carbon fiber reinforced polycarbonate composite for lightweight structural applications

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

Enhanced interfacial properties of hierarchical MXene/CF composites via low content electrophoretic deposition

Insight into the mechanical properties and thermal expansion behavior of epoxy nanocomposites reinforced with multi‐walled carbon nanotube solvent‐free nanofluids

Effectiveness of multi‐walled carbon nanotube on the improvement of tensile, flexural, and low‐velocity impact properties of hybrid Kevlar/carbon fiber reinforced epoxy‐based composites

MXene modified carbon fiber composites with improved mechanical properties based on electrophoretic deposition

Effect of MWCNT on mechanical characterization of glass/carbon hybrid composites

Mechanical enhancement effect of the interlayer hybrid CNT film/carbon fiber/epoxy composite

Enhanced Electrical Conductivity and Interlaminar Fracture Toughness of CF/EP Composites via Interleaving Conductive Thermoplastic Films

Preparation and functional study of epoxy composites reinforced with ultra-low content single-walled carbon nanotubes

Investigation of mechanical properties of multi-walled carbon nanotubes/hollow glass microspheres – carbon fibre-reinforced epoxy composites in transverse fibre directions

Characterization of the interface and interphase region in the multi-walled carbon nanotube modified epoxy resin/carbon fiber hybrid nanocomposite

Effectiveness of short and straight carbon nanotubes on dispersion state and static/dynamic mechanical properties of woven glass fibre-reinforced polymer laminates

Carbon fiber/epoxy composite property enhancement through incorporation of carbon nanotubes at the fiber-matrix interphase – Part II: Mechanical and electrical properties of carbon nanotube coated carbon fiber composites