Abstract:The interface properties between surface grown carbon nanotubes carbon fiber (CNTs‐CF) and epoxy resin were investigated by different modification methods. The X‐ray photoelectron spectrometer probations show that the pristine CNTs‐CF has very low contents of both oxygen element and active carbon element. Taking the naked carbon fiber (CF) without CNTs grown as a reference, the interfacial shear strength (IFSS) of CNTs‐CF/epoxy is only 5.6% higher. After heat treatment, chemical modification and sizing treatments, the surface chemical activity of CNTs‐CF is improved considerably. In contrast with the IFSS of standard CF/epoxy, the interfacial strength of chemical‐treated CNTs‐CF‐E1/epoxy is increased to 122.8 MPa by 29.7%. The increasing content of the epoxy active groups at the modified CNTs‐CF‐E1 surface is conducive to forming covalent bonds between the epoxy resin and the CNTs‐CF‐E1 surface particularly the activated nanotube surface. The enhancement of CNT/epoxy interface is beneficial to the over whole interface property of the composites. Hence, the compressive and torsion strength of sizing CNTs‐CF‐E1 bundle combined with epoxy resin are increased by 32.4% and 14.1%, respectively. The SEM images show the failure morphologies of different modification methods, and the enhancement mechanism of multiscale interface is further clarified. Compared with chemical treatment, heat treatment can remove the inert amorphous carbon on the CNTs‐CF fiber surface and improve the interface adhesion of CNT/epoxy and CF/epoxy, and surface sizing treatment improves the CF/epoxy interface. The enhancement mechanisms of these modified CNTs‐CFs/epoxy should be ascribed to the competition and synergetic effects of the multiscale interfaces, including CNT/CF, CNT/epoxy, and CF/epoxy.

Mechanical enhancement effect of the interlayer hybrid CNT film/carbon fiber/epoxy composite

Reducing Dispersity of Mechanical Properties of Carbon Fiber/epoxy Composites by Introducing Multi-Walled Carbon Nanotubes

Interfacial Strengthening and Self-Monitoring in Carbon Fiber-Reinforced Composites via Carbon Nanotube-Based Damage Sensors

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

Interfacial Enhancement by CNTs Grafting towards High-Performance Mechanical Properties of Carbon Fiber-Reinforced Epoxy Composites

Effect of CNT film interleaves on the flexural properties and strength after impact of CFRP composites

Improving Compression-after-impact Performance of Carbon–fiber Composites by CNTs/thermoplastic Hybrid Film Interlayer

Carbon fiber/epoxy composite property enhancement through incorporation of carbon nanotubes at the fiber-matrix interphase – Part II: Mechanical and electrical properties of carbon nanotube coated carbon fiber composites

Enhanced Electrical Conductivity and Interlaminar Fracture Toughness of CF/EP Composites via Interleaving Conductive Thermoplastic Films

Enhanced interlaminar fracture toughness of CF/PEEK laminates by interleaving CNT-decorated PEEK films

Enhanced interfacial properties of carbon fiber/epoxy composites by coating carbon nanotubes onto carbon fiber surface by one-step dipping method

Effects of the Electrophoretic Deposition of CNTs on the Mechanical Properties of Ti/CFRP Composite Laminates

Multiscale interfacial enhancement of surface grown carbon nanotubes carbon fiber composites

Increasing the interlaminar fracture toughness and thermal conductivity of carbon fiber/epoxy composites interleaved with carbon nanotube/polyimide composite films

Effect of chemically grafted CNTs onto carbon fiber on the mechanical properties of fiber metal laminates

Ultra-thin carbon fiber reinforced carbon nanotubes modified epoxy composites with superior mechanical and electrical properties for the aerospace field

A Novel Continuous Carbon Nanotube Fiber/carbon Composite by Electrified Preform Heating Chemical Vapor Infiltration

Effects of carbon nanotube length on interfacial properties of carbon fiber reinforced thermoplastic composites

Enhancing interlaminar fracture toughness of carbon fiber/epoxy composites toughened by polyethersulfone resin and hybrid carbon nanotubes/graphene oxide

Synergistic toughening on CFRP via in-depth stitched CNTs

A multi-layer resin film infusion process to control CNTs distribution and alignment for improving CFRP interlaminar fracture toughness