Abstract:Constructing strong interaction architecture is the key to achieve high mechanical performance because local interlaminar force can act as an efficient and robust bridge. Herein, closely interconnected network of Si3N4 nanowires and carbon nanotubes (SNs-CNTs) were designed and in situ introduced into carbon/carbon composites (CCs) for boosting their mechanical strength and friction performance, via a successive method of catalyst-assisted pyrolysis of polyureasilazane, isothermal chemical vapor deposition and chemical vapor infiltration. Fully covered SNs-CNTs allow increasing the bonding of fiber/matrix interfaces and the cohesion of pyrolytic carbon (PyC) matrix, leading to a better microcrystallinity of PyC in CCs. Owing to the synergistic effect of SNs and CNTs, the mechanical properties and friction properties of SNs-CNTs reinforced CCs exhibited obvious improvement. Compared with pure CCs, the interlaminar shear strength of SNs-CNTs reinforced CCs is increased by 59.87%, and the compression strength of SNs-CNTs reinforced CCs is increased by 32.69%. The friction coefficient of SNs-CNTs reinforced CCs is decreased by 39.50%, and the wear rate of SNs-CNTs reinforced CCs is decreased by 69.88%. Enhanced mechanical properties could be ascribed to the strong interaction between Si3N4 nanowires and carbon nanotubes. The present work highlights the importance of designing the three-dimensional network structure for enhancing the mechanical and friction properties of CCs. SNs-CNTs reinforced CCs with excellent mechanical and friction properties are potential materials for aerospace engineering.

Ultra-thin carbon fiber reinforced carbon nanotubes modified epoxy composites with superior mechanical and electrical properties for the aerospace field

Fabrication of Three-dimensional Thermally Conductive Carbon Fibers/Carbon Nanotubes Network Reinforce Epoxy Composites

Reducing Dispersity of Mechanical Properties of Carbon Fiber/epoxy Composites by Introducing Multi-Walled Carbon Nanotubes

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

Preparation and functional study of epoxy composites reinforced with ultra-low content single-walled carbon nanotubes

Rapid and Scalable Synthesis of Novel Carboxylated Aramid Nanofibers for Simultaneously Improving the Strength and Toughness of Carbon Fiber/epoxy Laminates

A Novel Continuous Carbon Nanotube Fiber/carbon Composite by Electrified Preform Heating Chemical Vapor Infiltration

Enhanced Electrical Conductivity and Interlaminar Fracture Toughness of CF/EP Composites via Interleaving Conductive Thermoplastic Films

Interfacial Enhancement by CNTs Grafting towards High-Performance Mechanical Properties of Carbon Fiber-Reinforced Epoxy Composites

Carbon Nanotube Film/Epoxy Composites with High Strength and Toughness

Ultralight hard carbon nanotubes nanofiber foam/epoxy nanocomposites for comprehensive microwave absorption performance

Preparation carbon nanotube-decorated carbon fibers under low pressure for epoxy-based unidirectional hierarchical composites with enhanced interlaminar shear strength

Carbon Fiber Composites Containing Strongly Coupled Si3N4 Nanowire-Carbon Nanotube Networks for Aerospace Engineering

Design and construction of interface engineering in short carbon fiber composites for excellent mechanical properties and efficient electromagnetic interference shielding

Ultra-high Temperature Performance of Carbon Fiber Composite Reinforced by HfC Nanowires: A Promising Lightweight Composites for Aerospace Engineering

Mechanical enhancement effect of the interlayer hybrid CNT film/carbon fiber/epoxy composite

Effects of CNT Microstructural Characteristics on the Interfacial Enhancement Mechanism of Carbon Fiber Reinforced Epoxy Composites Via Molecular Dynamics Simulations

Chitosan-doped Carbon Nanotubes Encapsulating Spread Carbon Fiber Composites with Superior Mechanical, Thermal, and Electrical Properties

Carbon nanotube film engineered fiber reinforced polymer composites

Enhanced Impact Resistance and Electromagnetic Interference Shielding of Carbon Nanotubes Films Composites

Carbon fiber/epoxy composite property enhancement through incorporation of carbon nanotubes at the fiber-matrix interphase – Part II: Mechanical and electrical properties of carbon nanotube coated carbon fiber composites