Abstract:The interface properties between surface grown carbon nanotubes carbon fiber (CNTs‐CF) and epoxy resin were investigated by different modification methods. The X‐ray photoelectron spectrometer probations show that the pristine CNTs‐CF has very low contents of both oxygen element and active carbon element. Taking the naked carbon fiber (CF) without CNTs grown as a reference, the interfacial shear strength (IFSS) of CNTs‐CF/epoxy is only 5.6% higher. After heat treatment, chemical modification and sizing treatments, the surface chemical activity of CNTs‐CF is improved considerably. In contrast with the IFSS of standard CF/epoxy, the interfacial strength of chemical‐treated CNTs‐CF‐E1/epoxy is increased to 122.8 MPa by 29.7%. The increasing content of the epoxy active groups at the modified CNTs‐CF‐E1 surface is conducive to forming covalent bonds between the epoxy resin and the CNTs‐CF‐E1 surface particularly the activated nanotube surface. The enhancement of CNT/epoxy interface is beneficial to the over whole interface property of the composites. Hence, the compressive and torsion strength of sizing CNTs‐CF‐E1 bundle combined with epoxy resin are increased by 32.4% and 14.1%, respectively. The SEM images show the failure morphologies of different modification methods, and the enhancement mechanism of multiscale interface is further clarified. Compared with chemical treatment, heat treatment can remove the inert amorphous carbon on the CNTs‐CF fiber surface and improve the interface adhesion of CNT/epoxy and CF/epoxy, and surface sizing treatment improves the CF/epoxy interface. The enhancement mechanisms of these modified CNTs‐CFs/epoxy should be ascribed to the competition and synergetic effects of the multiscale interfaces, including CNT/CF, CNT/epoxy, and CF/epoxy.

One‐step in‐situ growth of CNTs on oxidized carbon fiber: Effects of catalyst concentration and growth time on mechanical properties of carbon fiber

Carbon-nanotube-templated Carbon Nanofibers with Improved Mechanical Performance

In situ growth of CNTs on carbon fiber by chemical vapor deposition

Interfacial Strengthening and Self-Monitoring in Carbon Fiber-Reinforced Composites via Carbon Nanotube-Based Damage Sensors

Properties of Carbon Nano-Tubes–cf/sic Composite by Precursor Infiltration and Pyrolysis Process

Preparation of in-situ grown carbon nanotubes via dithiocarbamate in composites with excellent microstructure and mechanical performance

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

Optimization of Electrical Intensity for Electrochemical Anodic Oxidation to Modify the Surface of Carbon Fibers and Preparation of Carbon Nanotubes/Carbon Fiber Multi-Scale Reinforcements

Analyses of Reinforcing Effects of in Situ Grown CNTs on Carbon Fibre Fabric/epoxy Composites at Micro- and Macroscale

Non-destructive and controllable catalyst deposition of in situ growing carbon nanotubes onto the carbon fibre fabric

The Role of Grafting Force and Surface Wettability in Interfacial Enhancement of Carbon Nanotube/carbon Fiber Hierarchical Composites

In-situ growth of scaly carbon nanotube by Cu@Ni core-shell catalyst on continuous carbon fiber surface for multiply tenoned composite interphase

Carbon fiber-promoted activation of catalyst for efficient growth of single-walled carbon nanotubes

Effect of carbon nanotubes grown temperature on the fracture behavior of carbon fiber reinforced magnesium matrix composites: Interlaminar shear strength and tensile strength

Interfacial modification of carbon fiber by carbon nanotube gas-phase dispersion

A Novel Continuous Carbon Nanotube Fiber/carbon Composite by Electrified Preform Heating Chemical Vapor Infiltration

Kinetic Modulation of Carbon Nanotube Growth in Direct Spinning for High-Strength Carbon Nanotube Fibers.

Interfacial Improvement of Carbon Fiber/epoxy Composites Using a Simple Process for Depositing Commercially Functionalized Carbon Nanotubes on the Fibers

The synergetic relationship between the length and orientation of carbon nanotubes in direct spinning of high-strength carbon nanotube fibers

Multiscale interfacial enhancement of surface grown carbon nanotubes carbon fiber composites

Enhanced interfacial properties of carbon fiber/epoxy composites by coating carbon nanotubes onto carbon fiber surface by one-step dipping method