Abstract:Because of the dilemma that the current industrial Cu enhancement methods lead to a significant decline in conductivity and ductility, Cu matrix composites reinforced by oriented multi-walled carbon nanotubes (MWCNTs) were prepared through sintering, hot extrusion, and cold drawing. Before sintering, Ni, Cu, and Ni&Cu coatings were electroless plated on MWCNTs as the intermediate transition layer, and then they were mixed with Cu powder through a nitrogen bubbling assisted ultrasonic process. By analyzing the composition, microstructure, and formation mechanism of the interface between MWCNTs and the matrix, the influence and mechanism of the interface on the mechanical properties, conductivity, and ductility of the composites were explored. The results indicated that MWCNTs maintained a highly dispersed and highly consistent orientation in the Cu matrix. The coating on Ni@CNT was the densest, continuous, and complete. The Ni@CNTs/Cu composite had the greatest effect, while the Cu composite reinforced by MWCNT without coating had the smallest reduction in elongation and conductivity. The comprehensive performance of the Cu@CNTs/Cu composite was the most balanced, with an ultimate tensile strength that reached 373 MPa, while the ductility and conductivity were not excessively reduced. The axial electrical and thermal conductivity were 79.9 IACS % (International Annealed Copper Standard) and 376 W/mK, respectively.

Thermal and electrical conduction of AL/CNT composite

Influences of Nanoparticle Content on Electrical and Thermal Performances of Micro‐nano Hybrid Composites for Packaging Materials

Fabrication of Al-CNT composite with high hardness and electrical conductivity by controlling Al 4 C 3 formation

Architectural and component design of CNTs/Al hierarchical composite for enhanced mechanical/thermal properties

Electrical, Mechanical, and Thermal Properties of Multiwalled Carbon Nanotube Reinforced Alumina Composites

Thermal conductivities of alumina-based multiwall carbon nanotube ceramic composites

Microstructures, thermal and mechanical properties of Al–Si-CNT composites for thermal management applications

Fabrication of aluminum–carbon nanotube composites and their electrical properties

Microstructure and Mechanical Properties of ABOw and Nickel-Coated MWCNTs Reinforced 2024al Hybrid Composite Fabricated by Squeeze Casting

Mechanical and Conductive Properties of Cu Matrix Composites Reinforced by Oriented Carbon Nanotubes with Different Coatings

Studies on Thermal Conductive Properties and Mechanism of a New ACNT/C Nanocomposite Material

Carbon Nanotubes Grown on Graphite Films as Effective Interface Enhancement for an Aluminum Matrix Laminated Composite in Thermal Management Applications

Electrical Conductivity and Dielectric Properties of Multiwalled Carbon Nanotube and Alumina Composites

Preparation, microstructure and properties of Cu-8.3Al/CNTs composites with different volume fractions of CNTs

Effect Of Multi-Walled Carbon Nanotube On Mechanical Properties And Electrical Conductivity Of Alumina

Effect of powder microstructure on the thermal and mechanical properties of hot extruded Al-CNT composite

Effects of the addition of CNTs and Al alloying on the microstructure and properties of Cu-(Al)/CNTs composites

Dramatic effect of multiwalled carbon nanotubes on the electrical properties of alumina based ceramic nanocomposites

Investigation of mechanical and tribological behavior of Al-Ni-Co-MWCNT composites prepared by powder metallurgy technique

Preparation of MWNTs/Al2O3 Composites and Their Mechanical and Electrical Properties

Enhancement of thermal–mechanical performances via a selective CNTs configuration in laminated CNTs/AZ31B composite