Abstract:Micro-supercapacitors hold great attention as one of the promising energy storage devices satisfying the increasing quest for miniaturized and portable devices. Despite having impressive power density, superior cyclic lifetime, and high charge-discharge rates, micro-supercapacitors still suffer from low energy density, limits their practical application. The energy density (E=1/2CV 2 ) can be increased either by increasing specific capacitance (C) or voltage range (V). Asymmetric micro-supercapacitors have attracted great attention by using two different electrode materials to expand the voltage window and thus increase the energy density. Currently, versatile fabrication technologies such as inkjet printing, lithography, laser scribing, etc., are used to directly or indirectly pattern the electrode material; these techniques still suffer from scalable production and cost inefficiency. Here, we demonstrate the scalable production of a three-dimensional (3D) carbon foam (CF) based asymmetric micro-supercapacitor by spray printing technique on an array of interdigital electrodes. The solid-state asymmetric micro-supercapacitor comprised of CF-MnO positive electrode and CF-Fe 2 O 3 negative electrode achieves a high areal capacitance of 18.4 mF/cm 2 (2326.8 mF/cm 3 ) at 5 mV/s and a wider potential window of 1.4 V. Consequently, a superior energy density of 5 μWh/cm 2 is obtained, and high cyclic stability is confirmed with retention of the initial capacitance by 86.1% after 10000 electrochemical cycles. The optimized decoration of pseudocapacitive metal oxides in the 3D carbon network helps in high electrochemical utilization of materials where the 3D interconnected network of carbon provides overall electrical conductivity and structural integrity. The research provides a simple and scalable spray printing method to fabricate an asymmetric micro-supercapacitor using a custom-made mask that can be integrated on a large scale.

Preparation and Characterization of Three-Dimensional Micro-Electrode for Micro-Supercapacitor Based on Inductively Coupled Plasma Reactive Etching Technology

Preparation of Three-Dimensional Silicon Micro-Electrode Structure for Micro-Supercapacitor

Preparation and Characterization of Manganese Oxide Microelectrodes for Microelectromechanical System Supercapacitor

Preparation and Electrochemical Characteristics of Three-dimensional Manganese Oxide Micro-supercapacitor Electrode

Preparation and characterization of a micro-supercapacitor with three-dimensional microelectrode arrays

Supercapacitor Performance of MEMS Three-Dimensional Silica-Based Microelectrode Arrays

Preparation and Characterization of Micro Polypyrrole Electrodes for Supercapacitor

Fabrication and tests of a three-dimensional microsupercapacitor using SU-8 photoresist as the separator

A high-performance three-dimensional micro supercapacitor based on self-supporting composite materials

Electrochemical Performance of Three-Dimensional Microelectrode Arrays

Advanced Three-Dimensional Microelectrode Architecture Design for High-Performance On-Chip Micro-Supercapacitors

Fabrication of a novel micro-supercapacitor for MEMS and its performance analysis

Preparation of Three-Dimensional Carbon Microtube/Carbon Nanotube Composites and Their Application in Supercapacitor

Fabrication of A 3d Micro/Nano Dual-Scale Carbon Array and Its Demonstration As the Microelectrodes for Supercapacitors

Supercapacitive behavior depending on the mesopore size of three-dimensional micro-, meso- and macroporous silicon carbide for supercapacitors

A Novel Three-Dimensional Micro Supercapacitor Using Self-Support Nano Composite Materials

Three-Dimensional Carbon Foam Based Asymmetric Assembly of Metal Oxides Electrodes for High-Performance Solid-State Micro-Supercapacitor

Direct prototyping of 3D micro supercapacitors based on in-situ fabricated nanoporous carbon electrodes

A High-Performance Three-Dimensional Micro Supercapacitor Based on Ripple-Like Ruthenium Oxide–carbon Nanotube Composite Films

Nanostructured manganese dioxides as active materials for micro-supercapacitors

A Study of Nano-Structured Manganese Dioxides and Their Composites As Electrode Materials for Micro Supercapacitors