Abstract:Supercapacitors now play an important role in the progress of hybrid and electric vehicles, consumer electronics, and military and space applications. There is a growing demand in developing hybrid supercapacitor systems to overcome the energy density limitations of the current generation of carbon-based supercapacitors. Here, we demonstrate 3D high-performance hybrid supercapacitors and microsupercapacitors based on graphene and MnO2 by rationally designing the electrode microstructure and combining active materials with electrolytes that operate at high voltages. This results in hybrid electrodes with ultrahigh volumetric capacitance of over 1,100 F/cm(3). This corresponds to a specific capacitance of the constituent MnO2 of 1,145 F/g, which is close to the theoretical value of 1,380 F/g. The energy density of the full device varies between 22 and 42 Wh/l depending on the device configuration, which is superior to those of commercially available double-layer supercapacitors, pseudocapacitors, lithium-ion capacitors, and hybrid supercapacitors tested under the same conditions and is comparable to that of lead acid batteries. These hybrid supercapacitors use aqueous electrolytes and are assembled in air without the need for expensive "dry rooms" required for building today's supercapacitors. Furthermore, we demonstrate a simple technique for the fabrication of supercapacitor arrays for high-voltage applications. These arrays can be integrated with solar cells for efficient energy harvesting and storage systems.

Fabrication and tests of a three-dimensional microsupercapacitor using SU-8 photoresist as the separator

Silicon-nanoforest-based solvent-free micro-supercapacitors with ultrahigh spatial resolution <i>via</i> IC-compatible <i>in situ</i> fabrication for on-chip energy storage

Micro Supercapacitors Based on A 3d Structure with Symmetric Graphene or Activated Carbon Electrodes

A high-performance three-dimensional micro supercapacitor based on self-supporting composite materials

Preparation and characterization of a micro-supercapacitor with three-dimensional microelectrode arrays

Fabrication of a novel micro-supercapacitor for MEMS and its performance analysis

A Novel Three-Dimensional Micro Supercapacitor Using Self-Support Nano Composite Materials

Fabrication of a Symmetric Micro Supercapacitor Based on Tubular Ruthenium Oxide on Silicon 3D Microstructures

Direct prototyping of 3D micro supercapacitors based on in-situ fabricated nanoporous carbon electrodes

Supercapacitor Performance of MEMS Three-Dimensional Silica-Based Microelectrode Arrays

Preparation and Characterization of Three-Dimensional Micro-Electrode for Micro-Supercapacitor Based on Inductively Coupled Plasma Reactive Etching Technology

Preparation and Characterization of Manganese Oxide Microelectrodes for Microelectromechanical System Supercapacitor

Monolithic Integration of All‐in‐One Supercapacitor for 3D Electronics

A High-Performance Three-Dimensional Micro Supercapacitor Based on Ripple-Like Ruthenium Oxide–carbon Nanotube Composite Films

Fabrication of A 3d Micro/Nano Dual-Scale Carbon Array and Its Demonstration As the Microelectrodes for Supercapacitors

Fabrication and Tests of a Micro-Supercapacitor Using Polypyrrole-Based Micro-Electrode

Engineering three-dimensional hybrid supercapacitors and microsupercapacitors for high-performance integrated energy storage

3D Printing of Interdigitated Electrode for All-Solid-state Microsupercapacitors

Monolithic integrated micro-supercapacitors with ultra-high systemic volumetric performance and areal output voltage

High-Performance Microsupercapacitors based on Bio-Inspired Graphene Microfibers.

3D printing and micro-spring architecting to reconcile ultra-high areal and volumetric energy density in highly loaded supercapacitors