Abstract:Micro-supercapacitors hold great attention as one of the promising energy storage devices satisfying the increasing quest for miniaturized and portable devices. Despite having impressive power density, superior cyclic lifetime, and high charge-discharge rates, micro-supercapacitors still suffer from low energy density, limits their practical application. The energy density (E=1/2CV 2 ) can be increased either by increasing specific capacitance (C) or voltage range (V). Asymmetric micro-supercapacitors have attracted great attention by using two different electrode materials to expand the voltage window and thus increase the energy density. Currently, versatile fabrication technologies such as inkjet printing, lithography, laser scribing, etc., are used to directly or indirectly pattern the electrode material; these techniques still suffer from scalable production and cost inefficiency. Here, we demonstrate the scalable production of a three-dimensional (3D) carbon foam (CF) based asymmetric micro-supercapacitor by spray printing technique on an array of interdigital electrodes. The solid-state asymmetric micro-supercapacitor comprised of CF-MnO positive electrode and CF-Fe 2 O 3 negative electrode achieves a high areal capacitance of 18.4 mF/cm 2 (2326.8 mF/cm 3 ) at 5 mV/s and a wider potential window of 1.4 V. Consequently, a superior energy density of 5 μWh/cm 2 is obtained, and high cyclic stability is confirmed with retention of the initial capacitance by 86.1% after 10000 electrochemical cycles. The optimized decoration of pseudocapacitive metal oxides in the 3D carbon network helps in high electrochemical utilization of materials where the 3D interconnected network of carbon provides overall electrical conductivity and structural integrity. The research provides a simple and scalable spray printing method to fabricate an asymmetric micro-supercapacitor using a custom-made mask that can be integrated on a large scale.

Direct prototyping of 3D micro supercapacitors based on in-situ fabricated nanoporous carbon electrodes

Silicon-nanoforest-based solvent-free micro-supercapacitors with ultrahigh spatial resolution <i>via</i> IC-compatible <i>in situ</i> fabrication for on-chip energy storage

Micro Supercapacitors for Energy Storage, On-Chip Devices Based on Prototyping of Patterned Nanoporous Carbon

Direct Prototyping of Patterned Nanoporous Carbon: A Route from Materials to On-Chip Devices

A high-performance three-dimensional micro supercapacitor based on self-supporting composite materials

Design of Carbon Materials with Ultramicro-, Supermicro- and Mesopores Using Solvent- and Self-Template Strategy for Supercapacitors

Fabrication and tests of a three-dimensional microsupercapacitor using SU-8 photoresist as the separator

Preparation and characterization of a micro-supercapacitor with three-dimensional microelectrode arrays

Micro Supercapacitors Based on A 3d Structure with Symmetric Graphene or Activated Carbon Electrodes

A Novel Three-Dimensional Micro Supercapacitor Using Self-Support Nano Composite Materials

High-energy-density on-chip supercapacitors using manganese dioxide-decorated direct-prototyped porous carbon electrodes

Fabrication of a novel micro-supercapacitor for MEMS and its performance analysis

Supercapacitor Performance of MEMS Three-Dimensional Silica-Based Microelectrode Arrays

Improved conductivity and capacitance of interdigital carbon microelectrodes through integration with carbon nanotubes for micro-supercapacitors

Direct laser writing of micro-supercapacitors on hydrated graphite oxide films

Direct‐Ink‐Write 3D Printing of Programmable Micro‐Supercapacitors from MXene‐Regulating Conducting Polymer Inks

Preparation and Characterization of Micro Polypyrrole Electrodes for Supercapacitor

An in-situ Blowing-etching strategy for preparation of Macro-meso-micro hierarchical porous carbon and its supercapacitive property

Three-Dimensional Carbon Foam Based Asymmetric Assembly of Metal Oxides Electrodes for High-Performance Solid-State Micro-Supercapacitor

Preparation and Characterization of Three-Dimensional Micro-Electrode for Micro-Supercapacitor Based on Inductively Coupled Plasma Reactive Etching Technology