Abstract:Herein, a novel in-plane dual-axis micro-electro-mechanical system piezoresistive accelerometer was proposed based on theoretical and simulation analyses. Its self-support piezoresistive beam (SPB) possessed the features of force amplification and axial deformation to obtain high sensitivity. To clarify the influence of structural dimensions on the performance of the accelerometer and the pure axial-deformation condition of the SPB, a theoretical model was established to analyze mechanical behavior. The theoretical results were in well accordance with the simulation ones, displaying a maximum relative error of less than 10%. The theoretical and simulation results suggested that the accelerometer with thin and long support/hinge beams possesses a higher sensitivity but a lower frequency. However, the sensitivity and natural frequency increased simultaneously before the distance between SPB and support beam $D$ reached a certain value. The simulated longitudinal stress of SPB achieved the average value of 32.473 MPa, and the first-order natural frequency was nearly 13.6 kHz. Furthermore, the fabricated accelerometer was tested in a simple packaging case. The experimental results demonstrated that the proposed accelerometer had a measuring sensitivity of 0.198 mV/g/V with a maximum non-linearity of 1.00% FS and a resonant frequency of 12.93 kHz. The cross sensitivities were 11.93 and $15.97~\mu \text{V}$ /g/5V in the $y$ and $z$ axes, respectively, which were 1.21% and 1.61% of the prime-axis sensitivity. The zero offset with varying temperatures was 0.00296%/°C, and the zero drift in the long-term static stability test was 0.02 mV. All the results above revealed the promising application potential of the proposed accelerometer in vibration detection in the high-speed rotating spindle of machine tools. [2022-0057]

A Calculation Method and Verification for Natural Frequency of Micro Accelerometer

A New Type of MEMS Accelerometer with Up-Tuning Structure

Accurate mechanical-optical theoretical model of cross-axis sensitivity of an interferometric micro-optomechanical accelerometer

Simulation And Analysis Of Cantilever-Membrane Structure For Piezoresistive Micro-Accelerometers

Design of a Beam-Membrane Piezoresistive Accelerometer Based on MEMS Technology

Design and Simulation for Tri-Axial Piezoresistive Mems Accelerometer

Modeling and Characterization of a Novel In-Plane Dual-Axis MEMS Accelerometer Based on Self-Support Piezoresistive Beam

Resonant Frequency Analysis for Spring-Mass Structure in High-G MEMS Accelerometer

A piezoresistive micro-accelerometer with high frequency response and low transverse effect

Structural Design and Testing of a Micromechanical Resonant Accelerometer

Design and Analysis of Damping in Multi-Ranged Piezoresistive Micro Accelerometer

Analysis of Transverse Sensitivity in Eight-beam Piezoresistive Micro-accelerometer

Critical Technologies in Design of Micromechanical Resonant Accelerometer

Modeling and Simulation of A Silicon Integration Tri-Axial Piezoresistive MEMS Accelerometer Chip Used for High Impact Test

Piezoresistive Micro-Accelerometer with Supplement Structure.

NEW HINGED MICROMACHINED HIGH-g ACCELEROMETER: MODELLING AND MECHANICAL ANALYSIS

Development of a High-Performance Microaccelerometer With Position Independent Pure-Axial Stressed Piezoresistive Beams

Design and Optimization of the Resonator in a Resonant Accelerometer Based on Mode and Frequency Analysis

Analysis and Design of a Novel Piezoresistive Accelerometer with Axially Stressed Self-Supporting Sensing Beams

A micromachined resonant accelerometer

Analysis of Four-Beam Piezoelectric Accelerometer Based on ANSYS