Abstract:A high-performance micromachined piezoresistive accelerometer, consisting of two axially stressed tiny beams combined with a central supporting cantilever, is developed for both much higher sensitivity and much broader bandwidth compared with conventional beam-mass piezoresistive accelerometers. With the pure axial-deformation scheme of the tiny beams, the developed accelerometer shows improvements in both sensitivity and resonant frequency. An analytic model is established for the pure axial-deformation condition of the tiny beams by adjusting the distance between the tiny beams and the central supporting cantilever. The specifications of the device, such as sensitivity and resonant frequency etc, are theoretically calculated. The analytic model is verified by using simulation of the finite element method (FEM), resulting in satisfactory agreement. Based on a figure of merit (the product of the sensitivity and the square of the resonant frequency), optimized design rules are obtained for the sensors of various measure-ranges from 0.25g to 25 000g. The accelerometers are fabricated by using silicon bulk micromachining technology. The formed 2.5g devices are characterized with a typical sensitivity of 106 mV/5 V/g and first mode resonant frequency of 1115 Hz. The testing results agree well with the design, thereby verifying the high performance of the proposed accelerometer. The developed sensors with the axially stressed tiny-beam scheme show obviously improved specifications, compared with previously published results.

NEW HINGED MICROMACHINED HIGH-g ACCELEROMETER: MODELLING AND MECHANICAL ANALYSIS

Finite Element Simulation on Packaging of Hinged High-G Micromachined Accelerometer

Accurate mechanical-optical theoretical model of cross-axis sensitivity of an interferometric micro-optomechanical accelerometer

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

Analysis and Amelioration about the Cross-Sensitivity of A High Resolution Moems Accelerometer Based on Diffraction Grating

A MOEMS Accelerometer Based on Diffraction Grating with Improved Mechanical Structure.

A Micromachined Piezoresistive High-G Accelerometer With High Sensitivity And Wide Frequency-Band: Design And Modeling

Monolithic Integrated Micro-Opto-Electromechanical Accelerometer Based on Michelson Interferometer Structure

A New Type of MEMS Accelerometer with Up-Tuning Structure

A Novel Hinged Micromachined High-G Piezoresistive Accelerometer

A High-Performance Micromachined Piezoresistive Accelerometer with Axially Stressed Tiny Beams

Piezoresistive Slot-Cantilever Type Accelerometer Inspired from Spider'S Slit Sensilla

Design and Simulation of A Multi-Finger Micromechanical Silicon Accelerometer

Critical Technologies in Design of Micromechanical Resonant Accelerometer

Structural Design and Testing of a Micromechanical Resonant Accelerometer

Design Of A High-Sensitivity Micromechanical Resonant Accelerometer With A Two-Stage Microlever

A New Analytical Model of Single-Stage Microleverage Mechanism in Resonant Accelerometer

Design and Simulation for Tri-Axial Piezoresistive Mems Accelerometer

A micromachined resonant accelerometer

Analysis On Twin-Mass Structure For A Piezoresistive Accelerometer

Versatile and Effective Design Platform for Surface Acoustic Wave Accelerometers