Abstract:A high-performance micromachined piezoresistive accelerometer, consisting of two axially stressed tiny beams combined with a central supporting cantilever, is developed for both much higher sensitivity and much broader bandwidth compared with conventional beam-mass piezoresistive accelerometers. With the pure axial-deformation scheme of the tiny beams, the developed accelerometer shows improvements in both sensitivity and resonant frequency. An analytic model is established for the pure axial-deformation condition of the tiny beams by adjusting the distance between the tiny beams and the central supporting cantilever. The specifications of the device, such as sensitivity and resonant frequency etc, are theoretically calculated. The analytic model is verified by using simulation of the finite element method (FEM), resulting in satisfactory agreement. Based on a figure of merit (the product of the sensitivity and the square of the resonant frequency), optimized design rules are obtained for the sensors of various measure-ranges from 0.25g to 25 000g. The accelerometers are fabricated by using silicon bulk micromachining technology. The formed 2.5g devices are characterized with a typical sensitivity of 106 mV/5 V/g and first mode resonant frequency of 1115 Hz. The testing results agree well with the design, thereby verifying the high performance of the proposed accelerometer. The developed sensors with the axially stressed tiny-beam scheme show obviously improved specifications, compared with previously published results.

Design and Simulation for Tri-Axial Piezoresistive Mems Accelerometer

Modeling and Simulation of A Silicon Integration Tri-Axial Piezoresistive MEMS Accelerometer Chip Used for High Impact Test

Design of a Triaxial Piezoelectric Accelerometer

Design and Simulation of A Novel Highly Symmetrical Piezoelectric Triaxial Accelerometer

Design and Simulation of Capacitive, Piezoresistive and Piezoelectric Triaxial Accelerometers Using a Highly Symmetrical Quad-Beam Structure

A Novel Tri-Axial Piezoelectric MEMS Accelerometer with Folded Beams

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

Analysis On Twin-Mass Structure For A Piezoresistive Accelerometer

Theoretical and numerical investigation of a new 3-axis SU-8 MEMS piezoresistive accelerometer

Design and Fabrication of a Highly Symmetrical Capacitive Triaxial Accelerometer

A High-Performance Micromachined Piezoresistive Accelerometer with Axially Stressed Tiny Beams

Design And Analysis Of Mems Biaxial Coupled Resonance Accelerometer

Design of a Biaxial High-G Piezoresistive Accelerometer with a Tension–Compression Structure

Versatile and Effective Design Platform for Surface Acoustic Wave Accelerometers

Development of a High-Performance Microaccelerometer With Position Independent Pure-Axial Stressed Piezoresistive Beams

Development of a MEMS Piezoresistive High-g Accelerometer with a Cross-Center Block Structure and Reliable Electrode

A Piezoresistive Accelerometer with Axially Stressed Tiny Beams for Both Much Increased Sensitivity and Much Broadened Frequency Bandwidth

Piezoresistive Slot-Cantilever Type Accelerometer Inspired from Spider'S Slit Sensilla

Design And Simulation Of A Novel Piezoresistive Accelerometer For High Accuracy And Overload Ability

A Micromachined Piezoresistive High-G Accelerometer With High Sensitivity And Wide Frequency-Band: Design And Modeling

NEW HINGED MICROMACHINED HIGH-g ACCELEROMETER: MODELLING AND MECHANICAL ANALYSIS