Abstract:Herein, a novel in-plane dual-axis micro-electro-mechanical system piezoresistive accelerometer was proposed based on theoretical and simulation analyses. Its self-support piezoresistive beam (SPB) possessed the features of force amplification and axial deformation to obtain high sensitivity. To clarify the influence of structural dimensions on the performance of the accelerometer and the pure axial-deformation condition of the SPB, a theoretical model was established to analyze mechanical behavior. The theoretical results were in well accordance with the simulation ones, displaying a maximum relative error of less than 10%. The theoretical and simulation results suggested that the accelerometer with thin and long support/hinge beams possesses a higher sensitivity but a lower frequency. However, the sensitivity and natural frequency increased simultaneously before the distance between SPB and support beam $D$ reached a certain value. The simulated longitudinal stress of SPB achieved the average value of 32.473 MPa, and the first-order natural frequency was nearly 13.6 kHz. Furthermore, the fabricated accelerometer was tested in a simple packaging case. The experimental results demonstrated that the proposed accelerometer had a measuring sensitivity of 0.198 mV/g/V with a maximum non-linearity of 1.00% FS and a resonant frequency of 12.93 kHz. The cross sensitivities were 11.93 and $15.97~\mu \text{V}$ /g/5V in the $y$ and $z$ axes, respectively, which were 1.21% and 1.61% of the prime-axis sensitivity. The zero offset with varying temperatures was 0.00296%/°C, and the zero drift in the long-term static stability test was 0.02 mV. All the results above revealed the promising application potential of the proposed accelerometer in vibration detection in the high-speed rotating spindle of machine tools. [2022-0057]

Design and Simulation of Capacitive, Piezoresistive and Piezoelectric Triaxial Accelerometers Using a Highly Symmetrical Quad-Beam Structure

Design and Simulation of A Novel Highly Symmetrical Piezoelectric Triaxial Accelerometer

Design and Fabrication of a Highly Symmetrical Capacitive Triaxial Accelerometer

Design and Simulation for Tri-Axial Piezoresistive Mems Accelerometer

A Novel Tri-Axial Piezoelectric MEMS Accelerometer with Folded Beams

Design of a Triaxial Piezoelectric Accelerometer

Structure Design of A Novel Triaxial Micro-Accelerometer

Monolithically Integrated Triaxial High-Performance Micro Accelerometers with Position-Independent Pure Axial Stressed Piezoresistive Beams

A High-g Triaxial Piezoresistive Accelerometer with Sensing Beams in Pure Axial Deformation.

Analysis and Design of a Novel Piezoresistive Accelerometer with Axially Stressed Self-Supporting Sensing Beams

Design and Measurement of a Piezoresistive Triaxial Accelerometer Based on MEMS Technology

Modeling and Simulation of A Silicon Integration Tri-Axial Piezoresistive MEMS Accelerometer Chip Used for High Impact Test

Design, Fabrication, and Characterization of a High-Performance Monolithic Triaxial Piezoresistive High-g Accelerometer

A Two-Axis MEMS Piezoresistive In-Plane Accelerometer with Pure Axially Deformed Microbeams

Analytical and finite element analysis of a new tri-axial piezoelectric accelerometer

Analysis and Design for Piezoresistive Accelerometer Geometry Considering Sensitivity, Resonant Frequency and Cross-Axis Sensitivity

Design and Characteristics of a Two-Axis Piezoelectric Accelerometer With Right Angle Cantilever Beam

Modeling and Characterization of a Novel In-Plane Dual-Axis MEMS Accelerometer Based on Self-Support Piezoresistive Beam

Design and Fabrication of A High-Sensitive Capacitive Biaxial Microaccelerometer

Analysis On Twin-Mass Structure For A Piezoresistive Accelerometer

Design of a Biaxial High-G Piezoresistive Accelerometer with a Tension–Compression Structure