Abstract:Herein, a novel in-plane dual-axis micro-electro-mechanical system piezoresistive accelerometer was proposed based on theoretical and simulation analyses. Its self-support piezoresistive beam (SPB) possessed the features of force amplification and axial deformation to obtain high sensitivity. To clarify the influence of structural dimensions on the performance of the accelerometer and the pure axial-deformation condition of the SPB, a theoretical model was established to analyze mechanical behavior. The theoretical results were in well accordance with the simulation ones, displaying a maximum relative error of less than 10%. The theoretical and simulation results suggested that the accelerometer with thin and long support/hinge beams possesses a higher sensitivity but a lower frequency. However, the sensitivity and natural frequency increased simultaneously before the distance between SPB and support beam $D$ reached a certain value. The simulated longitudinal stress of SPB achieved the average value of 32.473 MPa, and the first-order natural frequency was nearly 13.6 kHz. Furthermore, the fabricated accelerometer was tested in a simple packaging case. The experimental results demonstrated that the proposed accelerometer had a measuring sensitivity of 0.198 mV/g/V with a maximum non-linearity of 1.00% FS and a resonant frequency of 12.93 kHz. The cross sensitivities were 11.93 and $15.97~\mu \text{V}$ /g/5V in the $y$ and $z$ axes, respectively, which were 1.21% and 1.61% of the prime-axis sensitivity. The zero offset with varying temperatures was 0.00296%/°C, and the zero drift in the long-term static stability test was 0.02 mV. All the results above revealed the promising application potential of the proposed accelerometer in vibration detection in the high-speed rotating spindle of machine tools. [2022-0057]

A piezoresistive micro-accelerometer with high frequency response and low transverse effect

A High-Performance Multi-Beam Microaccelerometer for Vibration Monitoring in Intelligent Manufacturing Equipment

Development of a High-Performance Microaccelerometer With Position Independent Pure-Axial Stressed Piezoresistive Beams

Monolithically Integrated Triaxial High-Performance Micro Accelerometers with Position-Independent Pure Axial Stressed Piezoresistive Beams

Design of a Piezoelectric Accelerometer with High Sensitivity and Low Transverse Effect

Ultra-high-sensitivity micro-accelerometer achieved by pure axial deformation of piezoresistive beams

A Two-Axis MEMS Piezoresistive In-Plane Accelerometer with Pure Axially Deformed Microbeams

A High-Performance Micromachined Piezoresistive Accelerometer with Axially Stressed Tiny Beams

High Sensitivity MEMS Accelerometer Using PZT-Based Four L-Shaped Beam Structure

High Performance Piezoresistive Accelerometer Based on the Slot Etching in the EB(eight-beam) Structure

Piezoresistive Micro-Accelerometer with Supplement Structure.

Analysis and Design of a Novel Piezoresistive Accelerometer with Axially Stressed Self-Supporting Sensing Beams

Multi-Flexure Piezoresistive Accelerometer for Vibration Detection

A Piezoresistive Accelerometer with Axially Stressed Tiny Beams for Both Much Increased Sensitivity and Much Broadened Frequency Bandwidth

A Piezoresistive Accelerometer with a Novel Vertical Beam Structure

Modeling and Characterization of a Novel In-Plane Dual-Axis MEMS Accelerometer Based on Self-Support Piezoresistive Beam

A High-g Triaxial Piezoresistive Accelerometer with Sensing Beams in Pure Axial Deformation.

An improved structural design for accelerometers based on slotted eight-beam structure

A Novel Piezoresistive Accelerometer with SPBs to Improve the Tradeoff Between the Sensitivity and the Resonant Frequency

Novel high-performance piezoresistive shock accelerometer for ultra-high-g measurement utilizing self-support sensing beams

IMPACT EXPERIMENT ANALYSIS OF MEMS ULTRA-HIGH G PIEZORESISTIVE SHOCK ACCELEROMETER