Abstract:A high-performance micromachined piezoresistive accelerometer, consisting of two axially stressed tiny beams combined with a central supporting cantilever, is developed for both much higher sensitivity and much broader bandwidth compared with conventional beam-mass piezoresistive accelerometers. With the pure axial-deformation scheme of the tiny beams, the developed accelerometer shows improvements in both sensitivity and resonant frequency. An analytic model is established for the pure axial-deformation condition of the tiny beams by adjusting the distance between the tiny beams and the central supporting cantilever. The specifications of the device, such as sensitivity and resonant frequency etc, are theoretically calculated. The analytic model is verified by using simulation of the finite element method (FEM), resulting in satisfactory agreement. Based on a figure of merit (the product of the sensitivity and the square of the resonant frequency), optimized design rules are obtained for the sensors of various measure-ranges from 0.25g to 25 000g. The accelerometers are fabricated by using silicon bulk micromachining technology. The formed 2.5g devices are characterized with a typical sensitivity of 106 mV/5 V/g and first mode resonant frequency of 1115 Hz. The testing results agree well with the design, thereby verifying the high performance of the proposed accelerometer. The developed sensors with the axially stressed tiny-beam scheme show obviously improved specifications, compared with previously published results.

High Linearity Piezoresistance Micromachining Accelerometer with Low Range

A High-Performance Micromachined Piezoresistive Accelerometer with Axially Stressed Tiny Beams

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

An In-Plane Low-Noise Accelerometer Fabricated with an Improved Process Flow

Study of a Novel Micromachined Capacitive Accelerometer

A Micromachined Piezoresistive High-G Accelerometer With High Sensitivity And Wide Frequency-Band: Design And Modeling

Development of a High-Performance Microaccelerometer With Position Independent Pure-Axial Stressed Piezoresistive Beams

A Novel Hinged Micromachined High-G Piezoresistive Accelerometer

A piezoresistive micro-accelerometer with high frequency response and low transverse effect

A Piezoresistive Accelerometer with a Novel Vertical Beam Structure

Development of a MEMS Piezoresistive High-g Accelerometer with a Cross-Center Block Structure and Reliable Electrode

Piezoresistive Slot-Cantilever Type Accelerometer Inspired from Spider'S Slit Sensilla

Structural Design and Testing of a Micromechanical Resonant Accelerometer

Design And Simulation Of A Novel Piezoresistive Accelerometer For High Accuracy And Overload Ability

A Piezoresistive Accelerometer with Axially Stressed Tiny Beams for Both Much Increased Sensitivity and Much Broadened Frequency Bandwidth

High-Performance Single-Side Fabricated (111)-Silicon Dual-Cantilever Accelerometer with Squeeze-Film Air Damping Modulation

Design of a Biaxial High-G Piezoresistive Accelerometer with a Tension–Compression Structure

Micromachined Piezoresistive Accelerometers Based on an Asymmetrically Gapped Cantilever

A Study of U-shaped Micromachined Cantilever Array

A micromachined silicon resonant accelerometer

A micromachined resonant accelerometer