Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. The Cu base composites play a key role in multiple industrial applications such as bearing materials and carbon brushes owing to their superior thermal, mechanical and tribological features. Therefore, in the present investigation, synergetic influence of nano titanium carbide (TiCnp) and graphite particles (Grp) on tribological behaviour of Cu base self-lubricating composites have been studied. The composites with fixed 5wt% of Grp and varying amounts (1.5wt% to 4.5wt%) of TiCnp were prepared via flake powder metallurgy (flake PM) technique. The sintered samples were characterized by different techniques for phases, physical, morphological and mechanical properties. Pin-on-disc (POD) tribotester has been used to analyse the tribological behaviour of composites in dry sliding condition by varying loads (10 N to 30 N) and sliding velocities (0.75 m/s and 1.5 m/s) for a fixed sliding distance of 2000 m. The results indicate the successful formation of Cu-Grp and TiCnp-reinforced Cu-Grp composites. With addition of Grp, the wear rate and coefficient of friction (COF) of Cu matrix is reduced. The wear rate is further reduced with the incorporation of TiCnp particles. But, the COF shows the enhancement. The composite having 5wt% Grp–4.5wt% TiCnp shows the minimum wear and maximum hardness. The energy-dispersive spectroscopy (EDS) elemental mapping of worn surfaces indicates that TiCnp mechanically interlocks the graphite at the interface and prevent its removal and reduces the wear rate. The worn surface investigation also shows that the dominant mechanism of wear for pure Cu sample is delamination in nature. However, the mechanism of wear for TiCnp-reinforced composites is a combination of abrasive and delamination wear.

Dry sliding wear behavior of in situ Cu–TiB2 nanocomposites against medium carbon steel

Sliding Wear Behavior of TiB<sub>2</sub> Nanoparticle Reinforced Copper Matrix In-Situ Composites under Electric Current

Dry Sliding Friction and Wear Behavior of Cu-Nanosized TiB2 In-situ Composites

Electrical sliding wear behavior of TiB2 nanoparticles reinforced copper matrix in-situ composite

Mechanical and tribological property of Cu/CrB 2 composites under dry sliding condition

Dry Sliding Wear Properties of Annealed Carbon Steels Matrix Composites by Nanosized TiC‐TiB2 Particles

Dry Sliding Wear Properties of Annealed Carbon Steels Matrix Composites by Nano‐Sized TiC‐TiB2 Particles

Properties and elevated temperature wear mechanism of pure copper and TiC/Cu nanocomposites

Tribological behavior of in-situ nanosized TiB2 particles reinforced AZ91 matrix composite

Self-lubricating behavior caused by tribo-oxidation of Ti3SiC2/Cu composites in a wide temperature range

An Investigation of the Sliding Wear Behavior of Cu-Matrix Composite Reinforced by Carbon Nanotubes

Tribological properties of carbon-nanotube-reinforced copper composites

Synergetic influence of TiCnp and graphite particles on tribological performance of Cu based composites prepared by flake powder metallurgy

Wear Behavior of Ti6Al4V Based Hybrid Composites Reinforced with TiB2(7.5%) + TiC (7.5%)

Friction and wear behavior of CuFe3Al powder metallurgical composites in dry sliding

Wear and Frictional Behavior of Copper Modified Ti-6Al-4V Alloy

The Dry Sliding Wear Properties of Nano-Sized TiCp/Al-Cu Composites at Elevated Temperatures

Tribological Behavior of Ti3SiC2 and Ti3SiC2/Pb Composites Sliding Against Ni-based Alloys at Elevated Temperatures

Superior wear resistance of dual-phased TiC–TiB2 ceramic nanoparticles reinforced carbon steels

Enhanced mechanical and tribological properties of copper matrix composites reinforced by copper-coated graphite and Ti3AlC2